P0302 Cylinder Misfire

Hug0

Hi, little update...

It is open.. No shortage there.

If I connect wire to ECU socket with needle or something, there is no change.
Unfortunatelly, I don´t have that small pins to change whole wire without damaging original one.

I don´t want to cut original wire.
Unfortunatelly I can´t find that small pins anywhere.

Btw: we tried to check voltage with scope by putting needle into ECU socket and there was also only 2V.

I will let you know results after I´ll find correct pins and do a proper test with new wire.