Please help !

Originally Posted by CRiZO

Correct, factory pieces are usually plastic and yours seems to have left you and the kids. I'd replace the spring clamps while you're at it. That's not something that really ever falls out...

Anyone know if there's a lot of flex there? Maybe worn motor mounts wiggled it loose?

Originally Posted by Spooler

The little plastic coupler dry rots over time and bam. Not coolant.

Originally Posted by Alex_rentsch

I’m ordering this part but is there a temporary fix I can do to get my car home ? I’m in a paid parking lot right now and my place is like a 10 minute drive from center city. I just don’t want to have to keep paying for the parking longer than I have to lol

Originally Posted by nis350

just tow it home...

as other stated, this connector usually causes a slow leak, but your is broken in half. it is in a tight spot and be sure to bleed the cool system.

Originally Posted by Alex_rentsch

I’m ordering this part but is there a temporary fix I can do to get my car home ? I’m in a paid parking lot right now and my place is like a 10 minute drive from center city. I just don’t want to have to keep paying for the parking longer than I have to lol

Originally Posted by Spooler

PVC coupler from Lowe's /Home depot, 2 hose clamps and some coolant. Looks like 1/2in size. The PVC couplers are gray in color with slip ends on both sides.

Originally Posted by Alex_rentsch

do i have to worry about bleeding lines just to get it home?

Originally Posted by Spooler

You can half *** it but don't go with nothing. The problem is if you create an air pocket. They can be a pain to get out.

Originally Posted by Alex_rentsch

Yeah dont want to half *** it lol. Gonna try and see if nissan has the part. put the part in and do a coolant flush and bleed the lines with a DIY. any tips or tricks?