Clutch suggestions?

Wuero370z · 02-12-2019, 12:52 PM

My Z is still stock but planning on boost this summer. I had an action stage 3 on my previous 350z and it was great. I loved the bite. The chatter was a little rough but I didn’t mind. Im looking for a similar “feeling” clutch for my 370. I really want a nice bite and don’t mind a heavier pedal feel. I also want something reliable. I’ve heard the CSC deletes are prone to failure as much as if not more than stock so I’d probably just want a HD CSC... any recommendations and why would be appreciated. And yes I’ve read the other threads. I’m specifically considering speciality Z or a south bend clutch or something from a speed. Thanks

Sent from my iPhone using Tapatalk

Jinxx · 02-12-2019, 01:52 PM

I use Z speed clutch and HD CSC ...works great ..I’m at 612hp/512tq with boosted performance kit ....I had the road race kit from Z1 but it was junk pressure plate was dragging and made it difficult to go in gear at a dead stop ....had same kit in my supercharged Z and it was doing the same thing but not as bad ....switched to the Z speed kit and been great since

JLarson · 02-12-2019, 02:00 PM

Have the Zspeed Stage 3 kit + CMAK and love it, especially paired with the RJM pedal. Bite is aggressive, does a great job for me, and I like having the slave outside the bell housing if I ever need to replace it again.

Jayhovah · 02-12-2019, 02:49 PM

ZSpeed will set you up with whatever you need and has great service. Joe is one of the most trusted vendors in the community.

I am running the Z1 Clutch/FW combo along with the ZSpeed HD CSC and it has been a perfect setup for me (just over 400 lb-ft wtq)... not to mention very affordable compared to many options.

Spooler · 02-12-2019, 02:55 PM

I have a brand new in the box Specialty Z 6 puck I can sell you at a good deal. PM me for details.

Wuero370z · 02-12-2019, 05:43 PM

Seems like a ZSpeed is doing things right... anyone have experience with the speciality Z clutch? Any of you Fast intentions builds?

Sent from my iPhone using Tapatalk

Spooler · 02-12-2019, 06:03 PM

Quote:

Originally Posted by Wuero370z

Seems like a ZSpeed is doing things right... anyone have experience with the speciality Z clutch? Any of you Fast intentions builds?

Sent from my iPhone using Tapatalk

Most Fast Intention TT build's run them. I just need more clutch due to HP goals.

Elmo370z · 02-12-2019, 06:44 PM

ATS twin disk,comes with a Nissan turbo patrol slave

madwi · 02-12-2019, 06:57 PM

Quote:

Originally Posted by JLarson

Have the Zspeed Stage 3 kit + CMAK and love it, especially paired with the RJM pedal. Bite is aggressive, does a great job for me, and I like having the slave outside the bell housing if I ever need to replace it again.

Boosted Performance · 02-12-2019, 07:10 PM

Quote:

Originally Posted by JLarson

Have the Zspeed Stage 3 kit + CMAK and love it, especially paired with the RJM pedal. Bite is aggressive, does a great job for me, and I like having the slave outside the bell housing if I ever need to replace it again.

I have the same setup on my car (no RJM pedal though), installed it in a couple of local customers cars as well, they all love it.

Joe at Zspeed is the go to man for this. He really knows his stuff, and is very honest with customers about the way the car will drive/feel.

Quicksilvers · 02-15-2019, 04:53 AM

Z Speed Performance Southbend Stage 3 clutch kit or the Competition Clutch Stage 3 clutch kit matched with the Z Speed Performance billet steel flywheel. I used the Competition Clutch Stage 3 clutch kit and Z Speed Performance billet steel flywheel for over five years on a previous Z and held up very well with street duty and a whole lot of track duty. Just depends on what you plan to use your Z for? Do you plan to ever go to the track with your Z?

02-12-2019, 12:52 PM	#1 (permalink)
Wuero370z Enthusiast Member Join Date: Nov 2018 Location: Albuquerque Posts: 358 Drives: 2013 Nissan 370z Rep Power: 6716	Clutch suggestions? My Z is still stock but planning on boost this summer. I had an action stage 3 on my previous 350z and it was great. I loved the bite. The chatter was a little rough but I didn’t mind. Im looking for a similar “feeling” clutch for my 370. I really want a nice bite and don’t mind a heavier pedal feel. I also want something reliable. I’ve heard the CSC deletes are prone to failure as much as if not more than stock so I’d probably just want a HD CSC... any recommendations and why would be appreciated. And yes I’ve read the other threads. I’m specifically considering speciality Z or a south bend clutch or something from a speed. Thanks Sent from my iPhone using Tapatalk

02-12-2019, 02:00 PM	#3 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684369	Have the Zspeed Stage 3 kit + CMAK and love it, especially paired with the RJM pedal. Bite is aggressive, does a great job for me, and I like having the slave outside the bell housing if I ever need to replace it again. madwi and wideglideleon like this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

02-12-2019, 06:44 PM	#8 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	ATS twin disk,comes with a Nissan turbo patrol slave Spooler likes this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tips and Suggestions on RJM Clutch Assembly Install	TheWeez	DIY Section (Do-It-Yourself)	2	11-25-2015 03:46 AM
GT//Monsters Clutch Kits Flywheel Shop - Clutch Master \|\| Competition Clutch \|\| SPEC	gtmonsters	Drivetrain/Engine	189	10-30-2015 11:41 PM
Clutch and lightweight flywheel suggestions.	ziaprowler	Engine & Drivetrain	11	04-09-2014 05:53 PM
Gym Rats enter! Suggestions Suggestions!	Asheth	The Lounge (Off Topic)	50	04-18-2013 04:36 PM
Clutch Reviews/Suggestions	chuckd05	Engine & Drivetrain	45	07-15-2011 11:07 AM

02-12-2019, 01:52 PM	#2 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	I use Z speed clutch and HD CSC ...works great ..I’m at 612hp/512tq with boosted performance kit ....I had the road race kit from Z1 but it was junk pressure plate was dragging and made it difficult to go in gear at a dead stop ....had same kit in my supercharged Z and it was doing the same thing but not as bad ....switched to the Z speed kit and been great since

02-12-2019, 02:55 PM	#5 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	I have a brand new in the box Specialty Z 6 puck I can sell you at a good deal. PM me for details.

02-12-2019, 05:43 PM	#6 (permalink)
Wuero370z Enthusiast Member Join Date: Nov 2018 Location: Albuquerque Posts: 358 Drives: 2013 Nissan 370z Rep Power: 6716	Seems like a ZSpeed is doing things right... anyone have experience with the speciality Z clutch? Any of you Fast intentions builds? Sent from my iPhone using Tapatalk

02-15-2019, 04:53 AM	#11 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25462	Z Speed Performance Southbend Stage 3 clutch kit or the Competition Clutch Stage 3 clutch kit matched with the Z Speed Performance billet steel flywheel. I used the Competition Clutch Stage 3 clutch kit and Z Speed Performance billet steel flywheel for over five years on a previous Z and held up very well with street duty and a whole lot of track duty. Just depends on what you plan to use your Z for? Do you plan to ever go to the track with your Z?