Code P0106 Not Boosted

kaliwraith

Not sure. I've had the vehicle for 1 year (almost exactly). I installed the intake but I didn't clean the throttle bodies.

For an update:

1. I checked the ground impedance and it seems like it's a very good connection.
2. I unplugged the sensor and found that BARO still gave me a 14.4 reading.
3. Not sure how to check the sensor output voltage as the pins are well encapsulated when the sensor is connected to power.

Since the sensor is just reading less pressure than it should but I haven't seen the CEL come back after a couple of weeks, I might just replace the sensor (they're $70 at z1) and see if it gives me the right reading. I'll update you when I'm able.