Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Free differential bushing removal tool. (http://www.the370z.com/engine-drivetrain/125396-free-differential-bushing-removal-tool.html)

ThatOneZ34 05-14-2018 07:12 PM

Alright thank you. yes hopefully he is, I have to use my brothers car while my diff is out.

JLarson 05-15-2018 06:11 AM

Jlarson has been dawdling. I'm not going to be able to get mine done this week (zdayz) so I'll ship it to you, ThatOneZ34. Pming you to arrange.

ThatOneZ34 05-15-2018 06:04 PM

Awesome thank you!

BadBoy 08-27-2018 12:05 PM

I need the tool for this weekend. In the Austin, TX area . . . this is a great thread!!

Jhill 08-27-2018 01:46 PM

Damn, I just bought the tool cause I couldn’t find this thread again. Thought maybe it was dead.

Also I’m going with the z1 poly and good to see they are putting the thick bushing on top which seems to stop the gear whine, I was not looking forward to that.

BadBoy 08-29-2018 08:11 AM

I bit the bullet and bought the tool . . . install this weekend with the high capacity cover and fresh Motul . . .

JLarson 10-01-2018 02:17 PM

If anyone wants this tool, I'm done with it. Bushing is installed. However, word of warning - this is not an awesome tool for the job if you don't have a lot of space to use a breaker bar or something similar. You will have a lot of trouble cranking it on jack stands. If you have questions, let me know.

Rusty 10-01-2018 03:18 PM

Quote:

Originally Posted by JLarson (Post 3789207)
If anyone wants this tool, I'm done with it. Bushing is installed. However, word of warning - this is not an awesome tool for the job if you don't have a lot of space to use a breaker bar or something similar. You will have a lot of trouble cranking it on jack stands. If you have questions, let me know.

A deep 2" hole saw on a cordless drill to remove the center section. A sawzall to cut 3 relieve cuts in the outer shell. Inside muffler cutting tool to remove the outer shell. 25 minutes. Done.

https://www.homedepot.com/p/Diablo-2...00CT/301697691

https://shop.advanceautoparts.com/p/...FYeZdwod43wGlA

cupcakez 11-07-2018 04:33 PM

Quote:

Originally Posted by JLarson (Post 3789207)
If anyone wants this tool, I'm done with it. Bushing is installed. However, word of warning - this is not an awesome tool for the job if you don't have a lot of space to use a breaker bar or something similar. You will have a lot of trouble cranking it on jack stands. If you have questions, let me know.

I have a set of whiteline bushings that just came in.

I can pay for shipping to ship it to my house.

Can you PM me if it's still available?

JLarson 11-08-2018 08:26 AM

Responded to PM, I'll get this out to you asap!

bmstitt 11-26-2018 01:26 PM

Interested in this toool the next time it’s available!

JLarson 11-27-2018 06:14 AM

Cupcakez has the tool, so follow up with him on it.

Wuero370z 01-16-2019 01:42 AM

Quote:

Originally Posted by cupcakez (Post 3797389)
I have a set of whiteline bushings that just came in.

I can pay for shipping to ship it to my house.

Can you PM me if it's still available?

Tool still out there?

JLarson 01-16-2019 08:40 AM

PM cupcakez. He has the tool.

Bswanny 02-03-2019 09:57 AM

I need this tool. Is it still available?

Sent from my SAMSUNG-SM-G930A using Tapatalk

TMRN370z 02-21-2019 10:23 AM

Is the tool available?

cupcakez 02-21-2019 11:48 AM

Who needs the tool still? I have it. Sorry I haven't been on the forums lately until now, I haven't received any PMs from anybody that needed it aside from the last person who told me they needed it, then didn't need it anymore.

cupcakez 02-22-2019 07:28 PM

Update:
I no longer have the tool. It has been shipped to Forum User:
"TMRN370z"

Just for future references!

TMRN370z 03-10-2019 05:09 PM

I am done with the tool. Who needs it now?

Mrsocal 03-18-2019 03:04 PM

Quote:

Originally Posted by TMRN370z (Post 3832813)
I am done with the tool. Who needs it now?

I’ll need it soon...I’ll let you know in the next week or so

projectpanda 03-19-2019 03:47 PM

Quote:

Originally Posted by TMRN370z (Post 3832813)
I am done with the tool. Who needs it now?

Sent you a PM. I'm also in Atlanta and would like to borrow this week or so.

TMRN370z 04-10-2019 10:31 AM

Projectpanda now has the tool.

projectpanda 04-24-2019 07:34 AM

I'm done with it and its ready for the next person

Jayhovah 04-24-2019 09:31 AM

Quote:

Originally Posted by projectpanda (Post 3846155)
I'm done with it and its ready for the next person

Are you the project panda from youtube rearmount turbo build?

fechavez 05-29-2019 11:21 PM

Quote:

Originally Posted by projectpanda (Post 3846155)
I'm done with it and its ready for the next person


PM'd

getpho 06-22-2019 07:41 PM

Is this tool available?


Sent from my iPhone using Tapatalk

projectpanda 06-22-2019 08:22 PM

Quote:

Originally Posted by getpho (Post 3862811)
Is this tool available?


Sent from my iPhone using Tapatalk



I sent the tool to Fechavez. It’s in his possession now.


Sent from my iPhone using Tapatalk

fechavez 06-26-2019 07:31 PM

I have just shipped the tool to getpho.


Sent from my iPhone using Tapatalk

richie_240sx- 07-19-2019 01:18 PM

Can I be next on the list?

cupcakez 09-28-2019 09:28 PM

Who has the bushing tool atm? Getpho? or Richie?

richie_240sx- 09-29-2019 03:26 PM

I don’t have it. He might still have itz

cupcakez 09-30-2019 10:26 AM

Quote:

Originally Posted by richie_240sx- (Post 3880522)
I don’t have it. He might still have itz

Oh. You never got it then.. damn ok np thanks

cupcakez 10-03-2019 09:21 AM

Update:

Forum User: "GetPho" has the tool.
He PM'd me and said he has it, so I PM'd him back asking if he could send it over, told him to tell me his paypal and the cost of shipping.

This was about 3 days ago now?
He has been online multiple times since then, and I even sent a follow up PM asking if he was still going to send it or not, as I have not heard from him weather or not he would still send the tool.

He has ghosted me since then but has been online multiple times since then.

Just wanted to let everyone know the status of the tool and where it's at currently. He may be planning to keep it and stop sending it to others, or maybe he has something against me for whatever reason (never even spoke to the person until this past week)...and he just doesn't want to send it. No idea.

Thanks.
Will update if I hear anything else regarding the free tool to be passed around.

getpho 10-03-2019 08:27 PM

I replied on September 28, You replied to me 2 days ago, i think you should wait for a reply before accusing people of things and trying to flame me. I have 0 use for the item now so please don’t try bad mouthing people. I messed up with richie, but he never asked me again for the item so i never sent it. I’m sorry we dont have live notifications and check the forums on a daily basis. Very rude to try and put me on blast. Lmfao funny guy. What was your expected outcome from making these remarks?

cupcakez 10-03-2019 09:00 PM

2 Attachment(s)
Quote:

Originally Posted by getpho (Post 3881347)
I replied on September 28, You replied to me 2 days ago, i think you should wait for a reply before accusing people of things and trying to flame me. I have 0 use for the item now so please don’t try bad mouthing people. I messed up with richie, but he never asked me again for the item so i never sent it. I’m sorry we dont have live notifications and check the forums on a daily basis. Very rude to try and put me on blast. Lmfao funny guy. What was your expected outcome from making these remarks?

Proof that you replied to me on September 28? My PM logs say September 30 sir.
Lmao. If I wanted to put you on blast I would have said things in a much worse manner than I did. Plz.

Where is this September 28 PM that you sent me for a reply? You have proof because I surely don't.

IIRC, I posted on this thread asking who has it, and you never replied. I had a PM from you, which was good enough. But that PM surely wasn't on September 28 because I never asked you or sent you a PM on that date, in fact the first PM I got from you was September 30th bro, and I replied October 1st -- 15.5 hours later xD

If you want to get extremely technical, I'll do it no worries. I don't feel there's a need to but whatevs!

On top of that, you've been on the forums multiple times in the past 3 days, so I'm 100% sure you read the messages. You were even, at one point, private messaging someone. So please don't make it sound like you haven't been on the forums at all lol. And don't tell me someone else has your account who made it appear that you were online but it really wasn't you. Or even the story of the forum auto logging you in every so often to put a time stamp on your last seen X date and time.

I get it. I really, honestly do. Life is hectic, and between work or off shift life, familial obligations, errands, much needed whatever things you may do on your free time, it's hard to find time to be on the forums or even socialize for that matter. But it's not impossible. I can't find it easy to believe that you are /that/ busy to where you can't have viewed the message and sent a simple yes or no lol. 1 or 2 minutes out of your day at max? 30 seconds to be realistic?

If all you had said was im busy ill get back to you when I can, then sure, no problem none of this would have happened.

But now you make it seem like I'm trying to flame you, if you want that then sure that's what you're going to get. Never did I intend for that to happen though.

Taptalk always has you logged on? Then why doesn't it consitently update the times you are /always/ logged on for? Maybe I don't understand how tapatalk works because I don't have it. I could be completely out of the loop on how it works and maybe it only updates your login times like twice or three times a day , I don't know.

But that doesn't explain why your account was private messaging earlier this week. Was there someone else using it? Does tapatalk go there automatically sometimes as a glitch? I don't know. Correct me if I'm wrong :)

getpho 10-03-2019 09:09 PM

https://uploads.tapatalk-cdn.com/201...03306ae928.jpg

Guess my phone is crazy then. Well cupcakez doesnt want it anymore so i’ll wait for next person to hit me up. I just ask the next person to be patient with me as i don’t check emails often. And i don’t have notifications on tapatalk, so i may take time to reply due to having a demanding job, please be patient with me .

cupcakez 10-03-2019 09:19 PM

Quote:

Originally Posted by getpho (Post 3881364)
https://uploads.tapatalk-cdn.com/201...03306ae928.jpg

Guess my phone is crazy then. Well cupcakez doesnt want it anymore so i’ll wait for next person to hit me up. I just ask the next person to be patient with me as i don’t check emails often. And i don’t have notifications on tapatalk, so i may take time to reply due to having a demanding job, please be patient with me .

Yeah your phone is crazy because september 28 is a Saturday and my PM's clearly stated I clearly PMd you after that. Fix your dates on your phone maybe you'd live with the real times then buddy.

Wasn't even for me in the first place. It was for a friend of mine. I'd already used the tool earlier this year, I don't need it again.

getpho 11-16-2019 03:11 PM

Given to AGNTWOO


Sent from my iPhone using Tapatalk

JARblue 11-16-2019 06:42 PM

Quote:

Originally Posted by cupcakez (Post 3881356)
I don't know.

Clearly... :rolleyes:

Bswanny 12-25-2019 11:09 AM

Is it possible to still get this? I really need it
Thanks

Sent from my SM-G965U1 using Tapatalk


All times are GMT -5. The time now is 02:22 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2