Stroking it

BGTV8 · 12-06-2017, 02:07 AM

So check my build which has a target of 500+ whilst remaining NA, but it is a full-race build based on JWT parts, non-VVEL heads which are mega CNC ported, 14:1 pistons with Bryant 4.0 steel crank

The new engine will go into the car after Xmas as we are only just now about to start the OEM engine with a Motec M150 tomorrow (7 Dec).

When we have the M150 running the EM engine, we'll install the new beastie and see where we get to.

The heads have sufficient flow to make just over 500 at the crank but it remains to be seen whether we can actually get that

Investment to date is 5 figures starting with a 2 ........ it is NOT cheap.

Be very careful what you wish for.

Best you speak with Clark Steppler or Ben Pila at JWT

BGTV8 VQ40HRGA Race engine build

SG4247 · 12-06-2017, 10:42 AM

Quote:

Originally Posted by BGTV8

So check my build which has a target of 500+ whilst remaining NA, but it is a full-race build based on JWT parts, non-VVEL heads which are mega CNC ported, 14:1 pistons with Bryant 4.0 steel crank

The new engine will go into the car after Xmas as we are only just now about to start the OEM engine with a Motec M150 tomorrow (7 Dec).

When we have the M150 running the EM engine, we'll install the new beastie and see where we get to.

The heads have sufficient flow to make just over 500 at the crank but it remains to be seen whether we can actually get that

Investment to date is 5 figures starting with a 2 ........ it is NOT cheap.

Be very careful what you wish for.

Best you speak with Clark Steppler or Ben Pila at JWT

BGTV8 VQ40HRGA Race engine build

Just for my reference what are the head flow numbers? i see the 304-310 numbers were they final?
Really interested in your results.

Email works as well.

Thanks

12-06-2017, 02:07 AM	#1 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,516 Drives: 09 Nissan 370Z M6 Rep Power: 39974	So check my build which has a target of 500+ whilst remaining NA, but it is a full-race build based on JWT parts, non-VVEL heads which are mega CNC ported, 14:1 pistons with Bryant 4.0 steel crank The new engine will go into the car after Xmas as we are only just now about to start the OEM engine with a Motec M150 tomorrow (7 Dec). When we have the M150 running the EM engine, we'll install the new beastie and see where we get to. The heads have sufficient flow to make just over 500 at the crank but it remains to be seen whether we can actually get that Investment to date is 5 figures starting with a 2 ........ it is NOT cheap. Be very careful what you wish for. Best you speak with Clark Steppler or Ben Pila at JWT BGTV8 VQ40HRGA Race engine build JARblue, Rusty, Elmo370z and 2 others like this.