10-18-2017, 07:44 PM
|
#16 (permalink)
|
A True Z Fanatic
Join Date: Sep 2010
Location: Albuquerque, NM
Posts: 2,044
Drives: 09 370Z Touring/Sprt
Rep Power: 10090
|
Quote:
Originally Posted by Jhill
Probably won’t have time till the weekend to see how the z responds to no maf signal so I can’t say for sure. Would really like to see a residual fuel pressure check and injector balance test on yours (I can’t recall if the Nissan pcm has injector balance testing abilities or not).
|
as far as what I've read the FSM does mention consult III being able to perform an injector balance test, not sure on the residual fuel pressure though. one thing I did notice is that with the mafs unplugged the computer is not able to calculate an engine load as that value remained at 0 the whole time the mafs were unplugged. I'm attaching a chart to this post just in case ou were curious what the fuel trims were doing exactly while the mafs were unplugged.
|
|
|