Holy double trinity of CEL codes

Nismodean · 12-07-2016, 05:08 PM

Over the last couple days I've gotten a CEL for several different codes, p0358, p0158, p0558, p2c58, p2a03, p0300. I have my own code reader and have included pictures of what I've gotten. While the codes were active I noticed no difference in how the car drives and accelerates, no limp mode.

I've found very little in the way of some of these codes for our car, some I'm kind of baffled as to the cause. I'm curious if anyone out there has experienced these set of codes in quick succession other than myself.

Only thing done to the car recently is Z1 clutch/flywheel and CSC CMAK install over a month ago. These codes are from less than a week ago and once cleared stay off for the rest of the day most of the time and pop up again the next day, more often than not while the engine is still not warmed up.

Any help would be greatly appreciated!

SouthArk370Z · 12-07-2016, 05:48 PM

Since so many systems are affected, I suspect a wiring problem. I'd start by doing a visual check of the harnesses and connectors. See FSM for harness routing, connector pinouts, etc.

Jhill · 12-10-2016, 12:02 PM

I would first see if I could use another code reader as p0358 is saying you have an issue with coil on cyl 8, which I hope we all know the z doesn't have. Also I would be looking for signs of pinched harness anywhere around the bell housing as the hi voltage code typically indicates an open circuit, so possibly the wire has broken if it got pinched anywhere doing the trans work. But those codes don't seem 100% accurate.

12-07-2016, 05:08 PM	#1 (permalink)
Nismodean Enthusiast Member Join Date: Oct 2010 Location: Washington Posts: 313 Drives: 2009 RIP Now 2012 Rep Power: 14	Holy double trinity of CEL codes Over the last couple days I've gotten a CEL for several different codes, p0358, p0158, p0558, p2c58, p2a03, p0300. I have my own code reader and have included pictures of what I've gotten. While the codes were active I noticed no difference in how the car drives and accelerates, no limp mode. I've found very little in the way of some of these codes for our car, some I'm kind of baffled as to the cause. I'm curious if anyone out there has experienced these set of codes in quick succession other than myself. Only thing done to the car recently is Z1 clutch/flywheel and CSC CMAK install over a month ago. These codes are from less than a week ago and once cleared stay off for the rest of the day most of the time and pop up again the next day, more often than not while the engine is still not warmed up. Any help would be greatly appreciated! __________________ The Truth, it hurts sometimes. FI LTH & FI CF CBE. This is a 370Z forum, if I want to fling poo at another brand of car and your feelings get hurt, then you're hanging out in the wrong forum (cry elsewhere). Last edited by Nismodean; 12-07-2016 at 05:15 PM.

12-07-2016, 05:48 PM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Since so many systems are affected, I suspect a wiring problem. I'd start by doing a visual check of the harnesses and connectors. See FSM for harness routing, connector pinouts, etc. Ghostvette likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Codes and more Codes? now no start...	instroke	Forced Induction	15	10-15-2015 10:51 PM
Holy Crap!	370Zsteve	The Lounge (Off Topic)	8	07-23-2012 12:00 AM
UR Lightweight Crank Pulley + Diablo Sports Trinity	>135I	Parts for sale (Private Classifieds)	11	06-20-2011 05:03 AM
Holy crap - I did it	jstevenson	Nissan 370Z General Discussions	18	05-18-2009 06:48 PM

12-10-2016, 12:02 PM	#3 (permalink)
Jhill Track Member Join Date: Mar 2016 Location: San jose Posts: 846 Drives: 2013 370z sport Rep Power: 3384	I would first see if I could use another code reader as p0358 is saying you have an issue with coil on cyl 8, which I hope we all know the z doesn't have. Also I would be looking for signs of pinched harness anywhere around the bell housing as the hi voltage code typically indicates an open circuit, so possibly the wire has broken if it got pinched anywhere doing the trans work. But those codes don't seem 100% accurate.