Engine sludge

Spooler · 11-22-2016, 08:38 PM

Got it.

Spooler · 11-22-2016, 08:39 PM

Part deuce.

DatsunFTW · 11-22-2016, 08:44 PM

I see this thread is about my car. I'll post up a video in a few. I tore the block down completely and checked every bearing, seal, the crank, etc. Everything was fine and I saw no indication of a failure or damage to any bearings or any fine metal in the sump and what not thus far. I swapped the heads, timing cover, chains, phasers, gears, and pump over to the new block. Should be fine since the only real concern out of everything was timing. But since I replaced everything from my motor.

DatsunFTW · 11-22-2016, 08:48 PM

Hopefully everything stays in shape... but I have good hopes

Spooler · 11-22-2016, 08:52 PM

My fun was on a 1.6 liter Nissan engine I was doing a front cover reseal due to a big oil leak. 13hr job. They had 2 O-rings between the front cover and engine block. The oil pump was connected to the front cover. 2-piece oil pan, etc. I opened up the engine and that is exactly what it looked like the video I posted above.

11-22-2016, 08:44 PM	#18 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 380	I see this thread is about my car. I'll post up a video in a few. I tore the block down completely and checked every bearing, seal, the crank, etc. Everything was fine and I saw no indication of a failure or damage to any bearings or any fine metal in the sump and what not thus far. I swapped the heads, timing cover, chains, phasers, gears, and pump over to the new block. Should be fine since the only real concern out of everything was timing. But since I replaced everything from my motor. __________________ The Build

11-22-2016, 08:48 PM	#19 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 380	Hopefully everything stays in shape... but I have good hopes __________________ The Build

11-22-2016, 08:52 PM	#20 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,061 Drives: 2013 Nismo 370z Rep Power: 2684393	My fun was on a 1.6 liter Nissan engine I was doing a front cover reseal due to a big oil leak. 13hr job. They had 2 O-rings between the front cover and engine block. The oil pump was connected to the front cover. 2-piece oil pan, etc. I opened up the engine and that is exactly what it looked like the video I posted above. Last edited by Spooler; 11-22-2016 at 08:54 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Warm Engine Vs Cold Engine Oil and Spirited Driving	MagmaRed370z	Nissan 370Z General Discussions	17	03-11-2016 07:03 PM
Swap my old engine to brand new engine... mod the car right away or not?	khsysh	Nissan 370Z General Discussions	15	05-30-2013 05:12 PM
370Z For Sale WTB: wrecked 370z with working engine... or engine	travisjb	370Z For Sale	0	01-15-2012 11:47 AM
How can you get an engine so full of sludge in only a few years?	Brett@ImportPartsPro	Nissan 370Z Photos / Spyshots / Video / Media Gallery	11	03-18-2011 04:27 PM
Pic request: 370z engine bay w/stillen g3's and Seibon engine cover.	atx370z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	20	01-05-2011 12:50 PM

11-22-2016, 08:38 PM	#16 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,061 Drives: 2013 Nismo 370z Rep Power: 2684393	Got it.

11-22-2016, 08:39 PM	#17 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,061 Drives: 2013 Nismo 370z Rep Power: 2684393	Part deuce.