|
Add an extended to the OEM pressure port, place the OEM sender in one hole in the extender and a 30psi analogue sender that drives power to a big red
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
08-09-2016, 03:11 PM
|
#5 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2009
Location: 03350 Australia
Posts: 1,516
Drives: 09 Nissan 370Z M6
Rep Power: 39975   |
Add an extended to the OEM pressure port, place the OEM sender in one hole in the extender and a 30psi analogue sender that drives power to a big red light on the dash so that the light comes on if pressure drops below 30psi.
The alternative is to piggy-back off the ECU input as has been suggested and run that to an aftermarket dash (which can also take an OBDII feed). There are lots of these options, from Motec/Haltech/RacePak down to chinois EBay specials. The ECU pin-outs are in the FSM |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Low Oil Pressure Light? Help please! | NismoZ370 | Engine & Drivetrain | 9 | 06-15-2016 10:46 PM |
| Pressure washer | dP3NGU1N | Detailing / Washing / Waxing / Cosmetic Maintenance and Repair | 36 | 02-09-2013 02:20 AM |
| Tire pressure | bigrob126 | Wheels & Tires | 4 | 02-10-2011 09:44 PM |
| Oil Pressure Sensor | JMac88 | Intake/Exhaust | 2 | 11-19-2010 09:23 AM |
| 370 oil pressure and AEM gauge | binto100 | Nissan 370Z General Discussions | 0 | 05-26-2010 07:04 PM |
1Likes
Threaded Mode
