idling issues

maizenblue · 01-08-2016, 11:38 AM

Alright so about 2 weeks ago my car started to have trouble idling. It would jump up and drop down after it warmed up but never had any trouble while driving. It threw a p0300 and 2 downstream oxygen sensor codes for the same sensor. I found that the upper intake manifold had a vacuum leak and a wire for the sensor was cut from dragging on the ground. Fixed the wire, replaced the manifold gasket and cleaned the throttle bodies and maf sensors. Cleared the codes and took it for a drive. Idled fine but stalled while approaching red lights three times. I thought maybe the ecu needed to relearn and did an ecu reset. Now the car will idle fine 95% of the time and then occasionally stutter like it will die and then catches itself but has not stalled for about 50 miles now, currently still waiting to see if the check engine light comes back.

Sorry about the long post, my question is if anyone has any other ideas about what could be causing the occasional stumble, I've read plenty of people's cars stumble like this, but I don't want to call it normal since I've had an idling issue so recently

SouthArk370Z · 01-08-2016, 12:09 PM

First thing I'd look at is the repairs to the sensor wiring. If you have high resistance, it can cause problems.

maizenblue · 01-08-2016, 12:22 PM

I won't have access to my multimeter until Monday but I'll look into that then. I should clarify I didn't repair the wire until after the car stalled on my test drive.

maizenblue · 02-26-2016, 07:00 PM

I forgot to update but incase anyone stumbles across this with a similar issue my solution was to recalibrate the throttle bodies. I wasn't aware the throttle bodies had a relearn procedure to do after they are removed for cleaning. But sure enough after I did the procedure the car no longer stumbles and stalls.

SouthArk370Z · 02-26-2016, 07:44 PM

Thanks for the update.

01-08-2016, 11:38 AM	#1 (permalink)
maizenblue Enthusiast Member Join Date: Sep 2013 Location: Denver Posts: 288 Drives: 2010 370Z Rep Power: 12	idling issues Alright so about 2 weeks ago my car started to have trouble idling. It would jump up and drop down after it warmed up but never had any trouble while driving. It threw a p0300 and 2 downstream oxygen sensor codes for the same sensor. I found that the upper intake manifold had a vacuum leak and a wire for the sensor was cut from dragging on the ground. Fixed the wire, replaced the manifold gasket and cleaned the throttle bodies and maf sensors. Cleared the codes and took it for a drive. Idled fine but stalled while approaching red lights three times. I thought maybe the ecu needed to relearn and did an ecu reset. Now the car will idle fine 95% of the time and then occasionally stutter like it will die and then catches itself but has not stalled for about 50 miles now, currently still waiting to see if the check engine light comes back. Sorry about the long post, my question is if anyone has any other ideas about what could be causing the occasional stumble, I've read plenty of people's cars stumble like this, but I don't want to call it normal since I've had an idling issue so recently

01-08-2016, 12:09 PM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	First thing I'd look at is the repairs to the sensor wiring. If you have high resistance, it can cause problems. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

02-26-2016, 07:44 PM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Thanks for the update. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shaking while idling?	AggieDev	Engine & Drivetrain	5	06-04-2015 12:23 AM
Throttle body cleaning due to idling issues after a stop.	nick760	DIY Section (Do-It-Yourself)	10	09-17-2014 01:48 PM
Idling at 1000rpm	marky7033	Engine & Drivetrain	9	10-29-2013 11:37 AM
Idling issue... now i got a MIL!	jdgoodwi	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	19	12-05-2010 11:12 PM
Problem with High Idling on my Z	jtroun	Nissan 370Z General Discussions	12	03-17-2010 06:28 AM

01-08-2016, 12:22 PM	#3 (permalink)
maizenblue Enthusiast Member Join Date: Sep 2013 Location: Denver Posts: 288 Drives: 2010 370Z Rep Power: 12	I won't have access to my multimeter until Monday but I'll look into that then. I should clarify I didn't repair the wire until after the car stalled on my test drive.

02-26-2016, 07:00 PM	#4 (permalink)
maizenblue Enthusiast Member Join Date: Sep 2013 Location: Denver Posts: 288 Drives: 2010 370Z Rep Power: 12	I forgot to update but incase anyone stumbles across this with a similar issue my solution was to recalibrate the throttle bodies. I wasn't aware the throttle bodies had a relearn procedure to do after they are removed for cleaning. But sure enough after I did the procedure the car no longer stumbles and stalls.