Help with Zspeed Slave Cylinder

need4speed255 · 11-27-2015, 09:54 AM

Take the bleeder screw out and check the seating surface of the screw and the fitting as well. Look for an imperfect seating surface or a metal shaving that is preventing the seat from sealing. There must be something in there or one of the two are bad.

40 to 332 · 11-27-2015, 10:24 AM

Quote:

Originally Posted by need4speed255

Take the bleeder screw out and check the seating surface of the screw and the fitting as well. Look for an imperfect seating surface or a metal shaving that is preventing the seat from sealing. There must be something in there or one of the two are bad.

I agree. If the screw is bad, it can be replaced. If the seat is bad, you may be able to get away with the thread sealant.

11-27-2015, 09:54 AM	#1 (permalink)
need4speed255 Enthusiast Member Join Date: Oct 2014 Location: Indiana Posts: 262 Drives: 15Nsmo/99 EclipseGST Rep Power: 13	Take the bleeder screw out and check the seating surface of the screw and the fitting as well. Look for an imperfect seating surface or a metal shaving that is preventing the seat from sealing. There must be something in there or one of the two are bad. Trips likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ZSpeed Performance Heavy Duty CSC Clutch Slave Cylinder	Joe@ZSpeed	Drivetrain/Engine	82	06-17-2020 03:34 PM
Slave cylinder assistance	BadChachi	Engine & Drivetrain	2	05-02-2015 04:10 PM
Slave Cylinder	georgem71	Nissan 370Z Owners Manual / Service Manuals	4	03-18-2015 10:29 AM
2013 z no slave cylinder?	dP3NGU1N	Engine & Drivetrain	8	01-23-2013 09:42 AM
Clutch slave cylinder	NizzyBoy	Engine & Drivetrain	1	02-19-2011 02:24 PM