z1 25 row oil cooler question

evil370z · 05-02-2015, 01:16 PM

2014 Z, stillen g3 intakes.

yesterday a shop installed my z1 25 row oil cooler with setrab core, protective hose wrapping and the sandwich thermostatic plate.

the hose lines are in front of my intakes and are near / touching my bumper from the inside. will that melt or damage my bumper from the inside or damage my filters ? after driving, i touched the outside of my bumper and it was warm. just the passenger side cause thats where the hoses are. the protective hose wrapping should keep it the heat under control right ?. should i be worried ?

the shop said thats the best way they can run the hose lines cause of my stillen g3 intakes.

DavidZ370 · 05-02-2015, 02:05 PM

Why didn't they mount the hoses from the bottom like in ModShacks DIY, it shouldn't be anywhere near your G3 Filters at all. Heres a Link: DIY: Oil Cooler (scratch built install, lottsa pics).....>.
:At the bottom you can see the hoses are ran through the bottom.

DavidZ370 · 05-02-2015, 02:07 PM

Also can you post a Picture. I have never seen anyone run the Oil Cooler hoses anywhere near the "Intakes" as described. I might be getting the wrong image here.

evil370z · 05-02-2015, 02:13 PM

The bumper is on and everything I can't get good pics but the Z1 hoses are near my intakes and my bumper from outside passenger side gets warm

DavidZ370 · 05-02-2015, 02:18 PM

Hmm, Without pictures I cant be much of help, however with the Zip ties I don't believe they should be touching you're bumper at all.

Edit: Found what seems to be my understanding. the shop should have ran the lines from the bottom instead of the top. you would have Total clearance and no rubbing. anyways GL

evil370z · 05-02-2015, 02:39 PM

Thanks , im going back to the shop Monday and re route the hose lines.

onzedge · 05-03-2015, 07:20 AM

Quote:

Originally Posted by DavidZ370

Why didn't they mount the hoses from the bottom like in ModShacks DIY, it shouldn't be anywhere near your G3 Filters at all. Heres a Link: DIY: Oil Cooler (scratch built install, lottsa pics).....>.
:At the bottom you can see the hoses are ran through the bottom.

05-02-2015, 01:16 PM	#1 (permalink)
evil370z Enthusiast Member Join Date: Jun 2013 Location: New York Posts: 365 Drives: 14 touring/sport/6MT Rep Power: 11	z1 25 row oil cooler question 2014 Z, stillen g3 intakes. yesterday a shop installed my z1 25 row oil cooler with setrab core, protective hose wrapping and the sandwich thermostatic plate. the hose lines are in front of my intakes and are near / touching my bumper from the inside. will that melt or damage my bumper from the inside or damage my filters ? after driving, i touched the outside of my bumper and it was warm. just the passenger side cause thats where the hoses are. the protective hose wrapping should keep it the heat under control right ?. should i be worried ? the shop said thats the best way they can run the hose lines cause of my stillen g3 intakes. __________________ 2014 White Tour/Sports Package 6MT , RJM Adjustable Clutch Pedal, GT-R Start, Stillen CAI, Z1 25 Row Oil Cooler, Motordyne E370, Swifts, 20mm/25mm, SPL Rear Camber TOTALED 10/24/14 2013 Black Tour/Sports Package

05-02-2015, 02:05 PM	#2 (permalink)
DavidZ370 A True Z Fanatic Join Date: Oct 2013 Location: [= Posts: 1,065 Drives: 17' CWP STI Rep Power: 22	Why didn't they mount the hoses from the bottom like in ModShacks DIY, it shouldn't be anywhere near your G3 Filters at all. Heres a Link: DIY: Oil Cooler (scratch built install, lottsa pics).....>. :At the bottom you can see the hoses are ran through the bottom. onzedge likes this.

05-02-2015, 02:13 PM	#4 (permalink)
evil370z Enthusiast Member Join Date: Jun 2013 Location: New York Posts: 365 Drives: 14 touring/sport/6MT Rep Power: 11	The bumper is on and everything I can't get good pics but the Z1 hoses are near my intakes and my bumper from outside passenger side gets warm __________________ 2014 White Tour/Sports Package 6MT , RJM Adjustable Clutch Pedal, GT-R Start, Stillen CAI, Z1 25 Row Oil Cooler, Motordyne E370, Swifts, 20mm/25mm, SPL Rear Camber TOTALED 10/24/14 2013 Black Tour/Sports Package

05-02-2015, 02:18 PM	#5 (permalink)
DavidZ370 A True Z Fanatic Join Date: Oct 2013 Location: [= Posts: 1,065 Drives: 17' CWP STI Rep Power: 22	Hmm, Without pictures I cant be much of help, however with the Zip ties I don't believe they should be touching you're bumper at all. Edit: Found what seems to be my understanding. the shop should have ran the lines from the bottom instead of the top. you would have Total clearance and no rubbing. anyways GL Last edited by DavidZ370; 05-02-2015 at 02:27 PM.

05-02-2015, 02:39 PM	#6 (permalink)
evil370z Enthusiast Member Join Date: Jun 2013 Location: New York Posts: 365 Drives: 14 touring/sport/6MT Rep Power: 11	Thanks , im going back to the shop Monday and re route the hose lines. __________________ 2014 White Tour/Sports Package 6MT , RJM Adjustable Clutch Pedal, GT-R Start, Stillen CAI, Z1 25 Row Oil Cooler, Motordyne E370, Swifts, 20mm/25mm, SPL Rear Camber TOTALED 10/24/14 2013 Black Tour/Sports Package

05-02-2015, 02:07 PM	#3 (permalink)
DavidZ370 A True Z Fanatic Join Date: Oct 2013 Location: [= Posts: 1,065 Drives: 17' CWP STI Rep Power: 22	Also can you post a Picture. I have never seen anyone run the Oil Cooler hoses anywhere near the "Intakes" as described. I might be getting the wrong image here.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
25 row oil cooler question	mr gushe	Engine & Drivetrain	32	08-14-2013 11:09 AM
Different oil cooler question	bigdog1250	Engine & Drivetrain	4	06-25-2012 12:58 AM
Used Oil Cooler Question.	lhinojos	Engine & Drivetrain	5	06-04-2012 06:20 AM
Z1 oil cooler question	mike0983	Engine & Drivetrain	10	01-31-2012 11:27 AM
Another oil cooler question.	blackflag	Engine & Drivetrain	7	02-08-2010 09:15 AM