4.08 gears and SRM

6MT-Z34 · 02-25-2015, 03:37 PM

SRM=SyncroRev Match...so if you lose SRM you will lose the ability for the computer to match revs

FPenvy · 02-25-2015, 03:39 PM

Quote:

Originally Posted by 6MT-Z34

SRM=SyncroRev Match...so if you loose SRM you will loose the ability for the computer to match revs

the SRM can get loose?

never heard of that before.

6MT-Z34 · 02-25-2015, 03:45 PM

Quote:

Originally Posted by FPenvy

the SRM can get loose?

never heard of that before.

yeah then you need to get a metal detector to find it

L33T Z34 · 02-25-2015, 09:34 PM

LuLz! Yes, the Z's ECU does loooooze what gear its in when u go to a lower Final Drive (FD). It usually happens when u rip thru the gears. It will come back though and stay if u drive like an old man. SRM will not work of coarse. Don't UPREV offer a table where u can select what FD u have installed on the Z so SRM works properly?

I would hope a 4.08 FD Z would whoop a 3.69 FD Z from a 40mph roll race if u both start out in 2nd. WTF would start out in 4th going 40mph!

02-25-2015, 03:37 PM	#1 (permalink)
6MT-Z34 A True Z Fanatic Join Date: Jan 2013 Location: NJ Posts: 1,726 Drives: PW Z Rep Power: 17	SRM=SyncroRev Match...so if you lose SRM you will lose the ability for the computer to match revs Last edited by 6MT-Z34; 02-25-2015 at 03:45 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] SWAP SOCAL: 4.08 gears for 3.9 or 3.69 Gears	kosstick	Parts for sale (Private Classifieds)	26	09-24-2016 09:35 PM
4.36 gears	brucelidat	Engine & Drivetrain	34	06-22-2015 03:00 PM
4.08 gears and SRM	jamesj1996	Engine & Drivetrain	3	02-24-2015 07:00 PM
[FOR SALE] 4.08 Gears	joelio	Parts for sale (Private Classifieds)	9	05-22-2013 12:07 PM
4.08 gears	adam	Engine & Drivetrain	7	02-04-2013 02:48 PM

02-25-2015, 09:34 PM	#4 (permalink)
L33T Z34 Banned Join Date: Jun 2010 Location: Ahnald, MO Age: 48 Posts: 387 Drives: 09 K51 G C Bw/S 6MT Rep Power: 0	LuLz! Yes, the Z's ECU does loooooze what gear its in when u go to a lower Final Drive (FD). It usually happens when u rip thru the gears. It will come back though and stay if u drive like an old man. SRM will not work of coarse. Don't UPREV offer a table where u can select what FD u have installed on the Z so SRM works properly? I would hope a 4.08 FD Z would whoop a 3.69 FD Z from a 40mph roll race if u both start out in 2nd. WTF would start out in 4th going 40mph!