NonStopTuning Short Shifter GROUP BUY Offer

Jimbo370 · 04-07-2014, 07:19 AM

It might just be me since I am not use to 6 gears. The mechanic had a problem in the beginning with reverse not pushing down and he drives a dodge charger. he took it for a test drive and seemed to find the gears. I just seem to have a lot of play area to the right of 5th and 6th so I am hunting but there is no gears that far over. The plate may have something to do with it. Nothing to worry about it is a good shifter.

richc2jeter · 04-07-2014, 10:04 AM

Who else is confused and curious ?

NonStopTuning · 04-07-2014, 03:05 PM

We've covered this several times, and it has been photographed and documented in the DIY guide that was posted. The RED PLATE that is included with the NST shifter needs to be installed FACE DOWN. If this plate is not installed in the correct way (it only fits two ways) then reverse and the outer gears will be an issue.

When installed correctly (face down / flat side up) as seen in this photo, everything is 100% good to go.

FULL DIY GUIDE: DIY: NST Short Shifter Install [PICTURE HEAVY]

Install correctly and

04-07-2014, 07:19 AM	#1 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	shift problem It might just be me since I am not use to 6 gears. The mechanic had a problem in the beginning with reverse not pushing down and he drives a dodge charger. he took it for a test drive and seemed to find the gears. I just seem to have a lot of play area to the right of 5th and 6th so I am hunting but there is no gears that far over. The plate may have something to do with it. Nothing to worry about it is a good shifter.

04-07-2014, 10:04 AM	#2 (permalink)
richc2jeter Base Member Join Date: Sep 2011 Location: Rochester, NY Age: 32 Posts: 186 Drives: 40th Anniversary Z Rep Power: 13	Who else is confused and curious ? __________________ l 40th 370z (#720) l 20-5% Tint l Stillen Gen3 l GTHaus Axleback l VLEDs Swap l "40TH Z" Vet Plate l F.I. Test Pipes l GTR S/S l S04s (F-265s/R-305s) l GarageLine Mid & X Pipe l Swift Springs l SR Front Lip l Z1 Spacers (20/25) l

04-07-2014, 03:05 PM	#3 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 16	We've covered this several times, and it has been photographed and documented in the DIY guide that was posted. The RED PLATE that is included with the NST shifter needs to be installed FACE DOWN. If this plate is not installed in the correct way (it only fits two ways) then reverse and the outer gears will be an issue. When installed correctly (face down / flat side up) as seen in this photo, everything is 100% good to go. FULL DIY GUIDE: DIY: NST Short Shifter Install [PICTURE HEAVY] Install correctly and johnson14785 and Riptide67 like this. __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: TWM Short Shifter and Leather Shifter Boot	GaleForce	DIY Section (Do-It-Yourself)	84	04-11-2018 04:42 PM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 06:57 AM
NonStopTuning Short Shifter Kits: Nissan, Honda, Toyota, Scion, Lexus, etc	NonStopTuning	Drivetrain/Engine	56	03-29-2014 10:29 PM
B&M Short Shifter Group Buy	Josh@STILLEN	STILLEN	9	06-03-2009 10:02 AM