FS: Clutch Helper Springs!!!! Century Spring P/N 72577

Magic Bus · 09-21-2012, 03:10 PM

Put this spring on my 13 yesterday. Gotta say it's worth doing. Now clutch pedal is a little soft on top (not a negative), which makes it feel like you depress the clutch less=possible faster shifts, and has much better feel in the clutch.

Others have said it's very easy to do and takes just a few minutes, however if it's your first time, it will take longer. You need to be a contortionist to get under there and depress the clutch with one hand remove the clip/pin and replace. Plus you do need to get good lighting under there. I ended up using a stick to depress the clutch & wedge it against my seat so my hands could be free to remove/replace the clip & pin.

Also, only need to remove the top clip & pin to replace the spring, no need to remove both.

Thanks, LMBmikeZ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch pedal too soft/no feel? Remove the helper spring!	esfourteen	Engine & Drivetrain	560	12-31-2020 12:17 PM
Clutch pedal helper springs!	LMBmikeZ	Engine & Drivetrain	0	08-23-2011 09:38 PM
Clutch Helper Spring (last chance)	esfourteen	Group Buys	202	08-06-2011 04:14 PM
Clutch Helper Spring	esfourteen	Group Buys	159	06-24-2011 06:30 PM

09-21-2012, 03:10 PM	#11 (permalink)
Magic Bus A True Z Fanatic Join Date: May 2012 Location: Honolulu Posts: 1,427 Drives: 17 6MT M2 Rep Power: 18754	Put this spring on my 13 yesterday. Gotta say it's worth doing. Now clutch pedal is a little soft on top (not a negative), which makes it feel like you depress the clutch less=possible faster shifts, and has much better feel in the clutch. Others have said it's very easy to do and takes just a few minutes, however if it's your first time, it will take longer. You need to be a contortionist to get under there and depress the clutch with one hand remove the clip/pin and replace. Plus you do need to get good lighting under there. I ended up using a stick to depress the clutch & wedge it against my seat so my hands could be free to remove/replace the clip & pin. Also, only need to remove the top clip & pin to replace the spring, no need to remove both. Thanks, LMBmikeZ