Hood dampers?

grandpawmoses · 03-19-2014, 02:27 PM

Quote:

Originally Posted by kenchan

hope u dont install those up-side-down...

Thanks for the reminder but I did good this time. Took about fifteen minutes including both beer breaks.

kenchan · 03-19-2014, 02:51 PM

Quote:

Originally Posted by grandpawmoses

Thanks for the reminder but I did good this time. Took about fifteen minutes including both beer breaks.

excellent!

roy'sz · 03-19-2014, 08:43 AM

Quote:

Originally Posted by Krazy.1K

+1 on Z1 hood struts, installed in less than 10 min, great customer support.

I couldn't find the install guide online and they are coming in today. I was wondering if you had taken both of the nuts off at the same time on one side of the hood and if you had any allignment problems. I saw that kelly fields only had to take one nut off but the brackets in z1's pic looks like i have to take two off. just curious and any info is greatly appreciated.

TreeSemdyZee · 03-19-2014, 08:49 AM

Quote:

Originally Posted by roy'sz

I couldn't find the install guide online and they are coming in today. I was wondering if you had taken both of the nuts off at the same time on one side of the hood and if you had any allignment problems. I saw that kelly fields only had to take one nut off but the brackets in z1's pic looks like i have to take two off. just curious and any info is greatly appreciated.

http://www.z1motorsports.com/upload/...ll%20guide.pdf

grandpawmoses · 03-19-2014, 02:41 PM

Quote:

Originally Posted by roy'sz

I couldn't find the install guide online and they are coming in today. I was wondering if you had taken both of the nuts off at the same time on one side of the hood and if you had any allignment problems. I saw that kelly fields only had to take one nut off but the brackets in z1's pic looks like i have to take two off. just curious and any info is greatly appreciated.

There is an installation guide packed with the struts. But to answer your question, the new brackets do attach under two nuts. The guide says to take one nut off at a time but you have to loosen both nuts. I took both nuts off (the third nut keeps everything aligned).
Operation is great and alignment is perfect.
FYI, the little spring clips were loose in my box and I was convinced I didn't get them until I found them where I opened the box. They are tiny so watch for them.

roy'sz · 03-19-2014, 03:54 PM

Quote:

Originally Posted by grandpawmoses

There is an installation guide packed with the struts. But to answer your question, the new brackets do attach under two nuts. The guide says to take one nut off at a time but you have to loosen both nuts. I took both nuts off (the third nut keeps everything aligned).
Operation is great and alignment is perfect.
FYI, the little spring clips were loose in my box and I was convinced I didn't get them until I found them where I opened the box. They are tiny so watch for them.

thanx bro yeah I was struggling with the fact of trying to keep one nut tight while installing the other. This will be installed this weekend. Appreciate the insight....

Krazy.1K · 03-19-2014, 03:07 PM

very easy install, I didn't need no instructions, took me 10 mins. I'll post a pics when I get home from work.

$haq 370z · 04-18-2014, 05:39 PM

guys I'm confused about the first part of the instructions where is states to *The washer on the ball stud can be installed over or under the cover – installer’s choice, but it should be noted that if installed over the cover they cannot be removed without removing the hood strut lower ball stud (for instance for a battery service). Repeat on the opposite side.

can anyone elaborate in full detail sorry but i guess i might just be a lil to cautious thats all?

TreeSemdyZee · 04-18-2014, 06:28 PM

If you put the washer "over" the cover, it holds the battery or clutch/brake cover (it's actually not the cover itself, but the framework that holds the cover) so that it can't easily be removed. If you put the washer under the cover, then the cover will come off easily. I'd definitely recommend putting it under the cover.

$haq 370z · 04-19-2014, 04:46 PM

so basically put the washer under the black cover or under the wheel well ? sorry bout this I'm just too cautious like i said

TreeSemdyZee · 04-19-2014, 05:56 PM

Under the black cover.

$haq 370z · 04-20-2014, 02:31 PM

thanks ill take that into account now i can't wait for this kit

$haq 370z · 04-23-2014, 01:18 AM

well good news they are on and to be honest i only see a 1mm of a raised bulge, that is beyond nothing anyone else feel this way ?

grandpawmoses · 04-23-2014, 05:53 AM

Quote:

Originally Posted by $haq 370z

well good news they are on and to be honest i only see a 1mm of a raised bulge, that is beyond nothing anyone else feel this way ?

Trimming the vertical lip on the plastic battery/brake fluid covers to clear the struts will eliminate that.

$haq 370z · 04-23-2014, 10:22 AM

Quote:

Originally Posted by grandpawmoses

Trimming the vertical lip on the plastic battery/brake fluid covers to clear the struts will eliminate that.

is there a diy for this so i can get a rough idea of what to do

04-18-2014, 06:28 PM	#9 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 61 Posts: 4,887 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Hood dampers? If you put the washer "over" the cover, it holds the battery or clutch/brake cover (it's actually not the cover itself, but the framework that holds the cover) so that it can't easily be removed. If you put the washer under the cover, then the cover will come off easily. I'd definitely recommend putting it under the cover. __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

04-20-2014, 02:31 PM	#12 (permalink)
$haq 370z Base Member Join Date: Mar 2014 Location: Vancouver Canada Posts: 31 Drives: godzilla's lil sis Rep Power: 12	thanks ill take that into account now i can't wait for this kit TreeSemdyZee likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] z1 hood dampers	Ni55anPat	Parts for sale (Private Classifieds)	5	04-11-2013 10:25 AM
[WTB] CF Hood Dampers	omm370z	Parts for sale (Private Classifieds)	0	12-28-2012 12:45 PM
[FOR SALE] Evo-R Carbon Fiber hood dampers	muzik212	Parts for sale (Private Classifieds)	7	08-31-2012 11:11 PM
Hood Dampers for 370z?	TipsZ	Exterior & Interior	144	09-08-2011 03:48 PM

03-19-2014, 03:07 PM	#7 (permalink)
Krazy.1K Base Member Join Date: Feb 2014 Location: Rockledge, Florida Posts: 149 Drives: 14 370z Nismo TT Rep Power: 12	very easy install, I didn't need no instructions, took me 10 mins. I'll post a pics when I get home from work.

04-18-2014, 05:39 PM	#8 (permalink)
$haq 370z Base Member Join Date: Mar 2014 Location: Vancouver Canada Posts: 31 Drives: godzilla's lil sis Rep Power: 12	guys I'm confused about the first part of the instructions where is states to *The washer on the ball stud can be installed over or under the cover – installer’s choice, but it should be noted that if installed over the cover they cannot be removed without removing the hood strut lower ball stud (for instance for a battery service). Repeat on the opposite side. can anyone elaborate in full detail sorry but i guess i might just be a lil to cautious thats all?

04-19-2014, 04:46 PM	#10 (permalink)
$haq 370z Base Member Join Date: Mar 2014 Location: Vancouver Canada Posts: 31 Drives: godzilla's lil sis Rep Power: 12	so basically put the washer under the black cover or under the wheel well ? sorry bout this I'm just too cautious like i said

04-19-2014, 05:56 PM	#11 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 61 Posts: 4,887 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Under the black cover.

04-23-2014, 01:18 AM	#13 (permalink)
$haq 370z Base Member Join Date: Mar 2014 Location: Vancouver Canada Posts: 31 Drives: godzilla's lil sis Rep Power: 12	well good news they are on and to be honest i only see a 1mm of a raised bulge, that is beyond nothing anyone else feel this way ?