Anyone used an Add-A-Circuit before?

MX52Z · 08-23-2013, 10:56 AM

The cord from the detector should contain two wires: power and ground. You might have power going to it fine but if the ground wire isn't grounded, it won't work of course. That or you've swapped power and ground.

Arrvaxx · 08-23-2013, 11:05 AM

Quote:

Originally Posted by MX52Z

The cord from the detector should contain two wires: power and ground. You might have power going to it fine but if the ground wire isn't grounded, it won't work of course. That or you've swapped power and ground.

Ahhhhhh. Ok, that might be the issue. I'll try that! Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My on board @ Circuit of the Amercias	DR_	Track / Autocross / Drifting / Dragstrip	37	04-10-2014 08:59 AM
Circuit of the Americas!	LukasC	Track / Autocross / Drifting / Dragstrip	17	07-11-2013 01:31 AM
Z at the Circuit of the Americas	DR_	Nissan 370Z General Discussions	6	01-17-2013 11:00 AM
15A Add a Circuit	seande	Audio & Video	8	07-07-2011 10:52 AM
New Fog Light Circuit	Hugoneus	Exterior & Interior	6	03-03-2010 12:12 PM

08-23-2013, 10:56 AM	#1 (permalink)
MX52Z Enthusiast Member Join Date: Dec 2012 Location: Port Charlotte, FL Posts: 471 Drives: Z'less por ahora Rep Power: 14	The cord from the detector should contain two wires: power and ground. You might have power going to it fine but if the ground wire isn't grounded, it won't work of course. That or you've swapped power and ground.