Nissan 370Z Forum - [DIY] Install Rearview Camera for Stock Nav (2010)

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - [DIY] Install Rearview Camera for Stock Nav (2010) (http://www.the370z.com/diy-section-do-yourself/74370-diy-install-rearview-camera-stock-nav-2010-a.html)

ins_man

10-28-2017 11:10 PM

Thanks. I gave up after a few failed attempts and even put the whole dash back together. Today, I decided to try one more time. Worked like a charm. The only other question is ... does anyone know how to turn on the active guidelines within the factory Nav unit?

ins_man

10-31-2017 04:51 PM

Bump... Does anyone know how to activate the backup camera guidelines on the OEM navigation unit?

l2iceman

10-31-2017 05:49 PM

Quote:

Originally Posted by ins_man (Post 3704148)

Bump... Does anyone know how to activate the backup camera guidelines on the OEM navigation unit?

Here you go, once you access this menu, there are options to turn on oem guidelines.

With Radio off
Press and hold the “Settings” button and turn the volume control counter clockwise.
After about 40 clicks a menu will appear
Select “confirmation/adjustment”*
Next move down to “Camera” and select*
Then select “Camera Syst Type” and change from “No Camera” to “With Rear view Camera”
Come all the way out of the menus using the back button and the system will reboot
Now when you put the car in reverse, if a blue screen appears with*“Please check your surroundings”*message your car is compatible

Sent from my SM-N920W8 using Tapatalk

ins_man

11-01-2017 11:59 PM

I did all of that. I now have a back up camera but no guide lines.

ins_man

11-02-2017 12:03 AM

I did all of that. I now have a backup camera but no guide lines. I didn't see anything in settings to activate them.

l2iceman

11-02-2017 05:36 AM

Quote:

Originally Posted by ins_man (Post 3704440)

I did all of that. I now have a backup camera but no guide lines. I didn't see anything in settings to activate them.

Did you go through the entire hidden menu? There should be an option to turn on or off guidelines.

Sent from my SM-N920W8 using Tapatalk

ins_man

11-02-2017 08:46 PM

Yes. I found a setting that appears to turn on the lines and I also found some setting values to key in, but it still doesn't have lines. I'll keep playing with it.

jasjeet

06-22-2018 06:38 PM

Quote:

Originally Posted by l2iceman (Post 3655887)

Hey everyone, so I decided to finally try this today. And instructions on first page are accurate. Here are the photos I've taken showing the back of the connector, it counts from right to left, top to bottom. Plug 7 and 8 are the correct ones to connect to. Make sure the pins are pushed in all the way, I didn't and the video flickered, but now it's perfect. I just need a camera that doesn't have built in lines.

In the connector picture (sorry it's blurry), the two blank ones on the top roe between the red and black wires are pins 8 and 7.

I'm using a license plate camera I ordered off of eBay, it replaced the left license plate light.https://uploads.tapatalk-cdn.com/201...9fcd5aebec.jpg https://uploads.tapatalk-cdn.com/201...834101298e.jpg https://uploads.tapatalk-cdn.com/201...79f5872f53.jpg

Sent from my SM-N920W8 using Tapatalk

Where is the white plug in the first pic located?

l2iceman

06-22-2018 06:43 PM

It's from behind the oem radio I believe.

Sent from my SM-N920W8 using Tapatalk

jasjeet

06-23-2018 04:06 AM

Quote:

Originally Posted by l2iceman (Post 3766617)

It's from behind the oem radio I believe.

Sent from my SM-N920W8 using Tapatalk

Ouch so I have to dismantle the interior and run cables all the way to the boot?

l2iceman

06-23-2018 04:37 AM

Yepp lol it seems like alot of work but wasn't too bad.

Sent from my SM-N920W8 using Tapatalk

2string1

06-24-2020 04:53 AM

Why do we need to buy a white plug? Don't you just plug the jumper in 7 & 8 pin into the existing plug in the back of the radio?

Spinja1991

04-20-2021 01:27 PM

This may be a bit of a long shot, especially on such an old thread. But does anybody have any spare Schmartboard cables that have been suggested that I could purchase from you and have posted to the UK?

I really can't find an alternative, and the options I've tried really don't want to play ball.

Thanks!

All times are GMT -5. The time now is 09:45 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page