they are...

FYI I found the same camera, on Amazon:

http://www.amazon.com/Moonet-Backup-.../dp/B00J21TNTW

Gonna give it a go...

Does anyone have any spare pins?

[DIY] Install Rearview Camera for Stock Nav (2010)
 

Never mind, I did what sparrow did with the female jumper wires. Smart man!

Anyway, I finished the install today. Works great! The Moonet camera fits like a glove, but video quality looks exactly like Sparrow's, and it's pretty mediocre imo. Overall I'm happy with it.

Thanks sselemit!!!

I found a guy in Southern Maryland who did mine. Works like a charm every time I put in reverse.

Any write ups for the 09's ?

I'm gonna do this in a couple weeks when the camera arrives but do you guys have pics of how the color lines from the camera look like along with the ones from the navi? Both at the same time? I'm assuming the lines on the navi can't be disabled?

Hey everyone, I'll be picking up a 2010 with oem navi this week! I've been reading about this and planned on purchasing the harness from carkitcompany to go with the eBay camera.

Anyone have updated pictures? The OP pics aren't loading.

And anyone have an eBay link to a camera without the guidelines built in? I'd love to use just the oem guidelines since it has predictive lines that go with the steering wheel inputs.

Where are the pictures for this, anyone?

Same I don't see the pics as well. :(

Hey everyone, so I decided to finally try this today. And instructions on first page are accurate. Here are the photos I've taken showing the back of the connector, it counts from right to left, top to bottom. Plug 7 and 8 are the correct ones to connect to. Make sure the pins are pushed in all the way, I didn't and the video flickered, but now it's perfect. I just need a camera that doesn't have built in lines.

In the connector picture (sorry it's blurry), the two blank ones on the top roe between the red and black wires are pins 8 and 7.

I'm using a license plate camera I ordered off of eBay, it replaced the left license plate light.https://uploads.tapatalk-cdn.com/201...9fcd5aebec.jpghttps://uploads.tapatalk-cdn.com/201...834101298e.jpghttps://uploads.tapatalk-cdn.com/201...79f5872f53.jpg

Sent from my SM-N920W8 using Tapatalk

material needed...
 

So to get this straight since i can only see your pics, all i need is this?

yellow female RCA cable
male to female jumpers with headers
backup camera

Yepp, exactly. That's it.

Sent from my SM-N920W8 using Tapatalk

Still Lost
 

I got these jumpers but the pins don't seem to be long enough to go through the plug and make a good connection with the Nav unit. Are you using the headers in some way?

I used one of those thin screwdrivers used for like eye glass repair, to shove the pins all the way through.

Sent from my SM-N920W8 using Tapatalk