Shift knob installation? Shift knob recommendations?

kenchan · 05-30-2013, 11:49 AM

Quote:

Originally Posted by Z Stig

I was able to remove mine the first time with my bare hands. Not sure if it is the spinach salads or that I just got lucky and the guy (or robot) at Nissan was trying to save thread lock and when they (it) installed my the gear shift knob. The OEM one still looks like new. My wife hates the aftermarket knob I am using, so I swap it back to OEM when she wants to take the Z for a spin.

yah, there were some folks that were lucky and got the stock ones off without a scratch (or needing to use tools even). i was jelly.

i kinda liked the stock knob too.

Gibby1113 · 05-30-2013, 02:38 PM

Quote:

Originally Posted by Z Stig

I was able to remove mine the first time with my bare hands. Not sure if it is the spinach salads or that I just got lucky and the guy (or robot) at Nissan was trying to save thread lock and when they (it) installed my the gear shift knob. The OEM one still looks like new. My wife hates the aftermarket knob I am using, so I swap it back to OEM when she wants to take the Z for a spin.

Damn now we know that the overly manly man drives a Z. Other people need the jaws of life to remove their OEM knob. I'm curious though, if I install the nismo carbon fiber knob will it be really hot when I leave the car in the heat? I live in Texas and its an oven over here. I don't wanna have to get in my car and cook my hands while I shift.

Chuck33079 · 05-30-2013, 09:51 AM

You got lucky. Mine was covered in thread locker.

Chuck33079 · 05-30-2013, 02:45 PM

Is it metal in addition to the cf? I'm in TX as well, and I'll never again have a metal shift knob.

Gibby1113 · 05-30-2013, 07:01 PM

It's a cylinder shape w/ metal on top and cf around the middle. Mostly cf.

Chuck33079 · 05-30-2013, 07:08 PM

I've got the same one, but all leather. It doesn't get hot at all. I'd stay away from one with metal on it.

05-30-2013, 09:51 AM	#3 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29540	You got lucky. Mine was covered in thread locker. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

05-30-2013, 02:45 PM	#4 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29540	Is it metal in addition to the cf? I'm in TX as well, and I'll never again have a metal shift knob. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

05-30-2013, 07:01 PM	#5 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 14	It's a cylinder shape w/ metal on top and cf around the middle. Mostly cf. __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

05-30-2013, 07:08 PM	#6 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29540	I've got the same one, but all leather. It doesn't get hot at all. I'd stay away from one with metal on it. Gibby1113 likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SOLD: 7AT Red/Carbon Shift knob with OEM 6MT Shift boot (SW Florida)	TMAN1985	Parts for sale (Private Classifieds)	8	04-23-2012 09:01 PM
shift knob installation (am i doing it right?)	JZNx	Exterior & Interior	20	01-28-2012 10:41 PM
New Shift Knob... let's try this again!	m4a1mustang	Exterior & Interior	19	06-22-2009 06:41 PM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 02:56 PM
Shift knob installation	DinoJ	Exterior & Interior	3	04-16-2009 12:03 PM