|
I took about a 15 minute break per coat and I was doing thin layers, but there was a corner that was hard to reach so it didn't get the
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-28-2009, 09:19 AM
|
#10 (permalink) |
|
Base Member
Join Date: Sep 2009
Location: Fairfield, CA
Posts: 12
Drives: 09 370Z BS M6
Rep Power: 17  |
I took about a 15 minute break per coat and I was doing thin layers, but there was a corner that was hard to reach so it didn't get the paint it wanted and so I sprayed that area directly and it got blasted. I used 800 grit sand paper on the shiny areas and then resprayed 1-2 layers of the satin black. Then, I used 2000 grit on everything to smooth out the orange peel look and to even the partial shiny areas. Shot it with 3 coats of the matte clear coat, and wha-la! Looks better. Thanks for the write up and the help Simota1. =) Now I need to figure out how I'm going to get the small dent out of my hood.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rear Valance or Fangs blacked out | Minicobra1 | DIY Section (Do-It-Yourself) | 48 | 01-23-2013 09:36 PM |
| DIY.CF Blacked out Fangs and Rear Diffuser | EVOnomore | DIY Section (Do-It-Yourself) | 12 | 11-29-2011 06:28 AM |
| should i keep the blacked out fangs? | zuperman 370 | Exterior & Interior | 17 | 04-14-2011 02:15 AM |
| My first MOD, blacked out fangs | dwntwnall4u | Exterior & Interior | 44 | 02-19-2011 03:16 PM |
| For those who blacked out their fangs. | ResQguy | Exterior & Interior | 31 | 10-16-2010 07:10 AM |
2Likes
Threaded Mode
