Just installed it per this method. I used a plastic dental pick to remove the old switch (see Trip's photos). For an all-thumbs person like me, it took approx 30 minutes - but it is doable, even by the most inept.

This method works great! Put a little scotch tape over the flat head of the screwdriver to avoid scratching and pry gently -- it pops out and you can do the swap in like 5-10 minutes.

Very east upgrade. I did it in under 3 mins. Take your time though!:happydance:

LoL @ other method.

This rocked! I used an old credit card.

Yep one of the best way without messing your leather up.

Cant believe I haven't seen this

Just did it. Super easy great post!

I ordered mine last night and should be here by the 6th, im excited! that "cream" colored start/stop was getting a big ugly to me.

Just got mine in! Thanks for the write up guys!!!

installed it today in five minutes, piece of cake, thanks guys

So I took apart me GTR button to get a better look on what's inside.
If you look at the picture the beige "nodes" at the 11, 12, and 1 O'Clock positions are the lights that come through the lock, acc, and on position.

Does anyone know how to change out these lights and what kind of lights these are?

Attachment 96383

Add me to the list. 5 minute install. Thank you for sharing.

http://www.the370z.com/members/danit...gtr-button.jpg

Ok where are the pictures with it illuminated???? Lets see what they look like in the dark and I just may join this band wagon.

Poor Quality pic.Cel pic in the garage

http://www.the370z.com/members/danit...ure84011-a.jpg

Me likey!! Added to my mod list.