Looks good but you can see the pry mark on the left side about 10-11 o'clock
|
I installed mine today using a metal screw driver and a microfiber towel so it won't leave any mark. Worked like a charm. 5 mins & I was done. Great write up. :tup:
|
this is what I followed too. installed mine few hours ago.. thanks big time!
|
Where I can order e button for cheap?
|
Quote:
go get yours! you will be happy just like me! :happydance: |
Quote:
|
wow i feel like a retard now
|
So I'm probably stupid but I can't seem to get the outer grey piece out of the start button:
http://www.the370z.com/attachments/d...2432.jpg?stc=1 I tried pushing the side and pulling it as instructed but it won't budge! Am I doing something wrong? Edit: Nvm, got it! :) |
Quote:
|
Quote:
Here is the web site: HANLEES HILLTOP NISSAN Msrp: $47.33 Online Price: $33.66 |
Quote:
|
Quote:
|
I used this method but my tool of choice was a 90 degree dental pick. It was the perfect tool for the job!
|
I use a old credit card.
|
I am gonna try this but scared im gonna break a clip or something also.is there like double.sided tape?
|
I used my finger. Took a while till i realized i was sliding it the wrong way lol
|
Did you guys need alot of force should i order a bezel just incase i break it? Will a credit card work?
|
It doesn't take much pressure to get it out. Don't use a crowbar and you'll be fine. :stirthepot:
|
Quote:
|
Perfect ill use a credit card 1st to get a gap then a small flat head with micro fibers to keep the plastics good. I like to plan ahead lol
|
Anyone in the market for one of these bad boys give me a holler. I work at a Nissan dealership in TX so I can give you a decent discount on these things. PM ME!
|
Did it last saturday, 5 mins top :)
|
Just did the install did it 15 mins before work....idk how i feel about it lol
|
Did the install today no problems, looks tricked out!:happydance:
|
The start button looks really cool at nighttime since you can see the START STOP words light up. Quick cool easy mod
|
Not being a Debbie downer but my ring dident pop out so easy and ended up leaving an little dent on the leather part surrounding the button. Only I will ever notice it but it is there.just throwing that out there
|
A big thanks for the info to take this out easy, just got mine in before work today and popped it in for a 2am install tonight after work! rofl
http://i73.photobucket.com/albums/i2...pseb147310.jpg |
Installed mine today. Took all of five minutes. Thanks OP
|
Quote:
|
Quote:
Quote:
|
Quote:
|
this may be a stupid question but is the GTR start button just a cosmetic upgrade or does it have any other advantages?
|
Quote:
|
Quote:
|
Pisses off the color-blind.
|
Just installed it per this method. I used a plastic dental pick to remove the old switch (see Trip's photos). For an all-thumbs person like me, it took approx 30 minutes - but it is doable, even by the most inept.
|
This method works great! Put a little scotch tape over the flat head of the screwdriver to avoid scratching and pry gently -- it pops out and you can do the swap in like 5-10 minutes.
|
Very east upgrade. I did it in under 3 mins. Take your time though!:happydance:
|
LoL @ other method.
This rocked! I used an old credit card. |
Yep one of the best way without messing your leather up.
|
All times are GMT -5. The time now is 11:52 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2