Nissan 370Z Forum - GTR start button! another alternative..

Page 2 of 10

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - GTR start button! another alternative.. (http://www.the370z.com/diy-section-do-yourself/61121-gtr-start-button-another-alternative.html)

Jordo!

10-20-2012 11:34 AM

Just did this! Rep!

LakeShow

10-21-2012 06:51 PM

Damn that's simple, probably going to do this mod now.

king12sky

10-21-2012 07:06 PM

Quote:

Originally Posted by roy'sz (Post 1971623)

thanx for the legit SHORTCUT from the original post. Def worth the rep...+1 my man! I got this one done in less than 2 min and didn't mar up my panels.
Here is a useful tip. Buy a mini flathead where it doesn't have grooves on the tip or grind it down, also fold a little bend on it with a small balpine hammer and wala...you got a screwdriver that you can use to pry it out. I will however at a later time paint the aluminum ring flat black...just sayin.

No worries, glad it helped! :D

Schsplayer00

12-13-2012 02:46 PM

GTR button

Nice!! Much faster and less complicated!! Just installed mine. Thank you!

SmallermouseZ

12-13-2012 04:50 PM

wow thats crazy fast. by the way, What happened to the AT shift knob in your car?

SA370

12-19-2012 12:37 AM

Glad I saw this. Made it a 30 sec job

jbsonit4u2

02-09-2013 04:51 PM

Thanks for the Quick Tip on the Red Start Button change out. Worked perfect.

Baer383

02-09-2013 05:21 PM

I would wear shoes while doing that to avoid stabbing yourself in the foot.:tiphat:

cautupwitdm

02-09-2013 06:56 PM

This was super easy, 5 minutes and done. Great alternative DIY.

kenchan

02-11-2013 04:44 PM

so no more removing rear tire? :confused: ;)

actually, i did this too a while back using an interior tool. :p

TheW3r3W0lf

02-11-2013 09:49 PM

I was holding off on this until I read your write up, thanks! Just ordered one from Hanlees Hilltop Nissan (thanks for the recommendation "1st") as they have next day shipping to my area for $6!

Not sure if I saw it in other posts or not but the part number to reference was #25151JF00A and they currently have it available for $31.24

RustyM2001

02-11-2013 11:36 PM

Thanks a lot for this! Works great and super fast!:tup:

TerribleONE

02-12-2013 12:24 AM

Thanks a lot for the tip! Gonna place an order for one now!

FLUJOKE

02-16-2013 04:34 AM

just ordered mine thank u! i hope i dont crack or break anything with my luck :/ anybody had any trouble so far?

Wabbyyy

02-16-2013 07:15 PM

defiantly doing this.

All times are GMT -5. The time now is 04:52 AM.

Page 2 of 10

Last »

Show 40 post(s) from this thread on one page