DIY: Fang Vents: Forced fresh air to your airbox

Namir · 06-28-2009, 02:18 PM

This might also work for those wanting to get some more air to the brakes. Is there an easy way to run these to the brakes without getting caught in the wheel/suspension linkages?

frost · 06-28-2009, 02:22 PM

Quote:

Originally Posted by Namir

This might also work for those wanting to get some more air to the brakes. Is there an easy way to run these to the brakes without getting caught in the wheel/suspension linkages?

That seems pretty easy to do, in my head anyway.

Modshack · 06-28-2009, 02:30 PM

Quote:

Originally Posted by Namir

This might also work for those wanting to get some more air to the brakes. Is there an easy way to run these to the brakes without getting caught in the wheel/suspension linkages?

That might be a little difficult with the routing clearances and plastic/metal in the way, but here are some other ideas that would work for a track setup using the same hoses and flanges and a few Shop vac parts...

: These were installed on my Audi TT but the concept would be similar..

Namir · 07-01-2009, 12:47 AM

Quote:

Originally Posted by Modshack

That might be a little difficult with the routing clearances and plastic/metal in the way, but here are some other ideas that would work for a track setup using the same hoses and flanges and a few Shop vac parts...

: These were installed on my Audi TT but the concept would be similar..

That's pretty much exactly what I was thinking of

I think this would be a great cheap mod for track rats. Especially if you already have a Stillen GIII
But like you said. clearances and routing will be the biggest problem.

Minicobra1 · 07-01-2009, 01:30 AM

This is a great DIY

rep points are coming your way!!

06-28-2009, 02:18 PM	#1 (permalink)
Namir Track Member Join Date: Nov 2008 Location: OH and VA Posts: 627 Drives: 09 G37S 6MT Rep Power: 256	This might also work for those wanting to get some more air to the brakes. Is there an easy way to run these to the brakes without getting caught in the wheel/suspension linkages? __________________ Ambition is the path to success. Persistence is the vehicle you arrive in. G37S\|6MT\|PREM\|NAV\|Eibach\|Ichibia\|Injen

07-01-2009, 01:30 AM	#5 (permalink)
Minicobra1 A True Z Fanatic Join Date: Nov 2008 Location: Orange County, CA. Posts: 1,205 Drives: 370Z Tour, Spt, 6mt Rep Power: 645	This is a great DIY rep points are coming your way!! __________________ 370z Tour\| Spt Pack\|Navi\|BERK CBE\|Berk HFC's\| Eibach Springs\| Hotchkis Sway Bars\|SPC Camber Arms\|15mm Ichiba Wheel Spacers\| 19"Factory Nismo Wheels-Matt Black\|Stop Tech Rotors\|TWM Shifter\|3M Tint\|Black Fangs\|Black Rear Valance\|JDM Fog Light\| MY BAND-www.myspace.com/petroleum

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Extra air to stock airbox	Mandingo	DIY Section (Do-It-Yourself)	14	03-17-2013 01:35 PM
[FOR SALE] Stock Airbox Assemblies	sixpax	Parts for sale (Private Classifieds)	19	03-12-2013 06:47 PM
Factory Airbox Mod?	ThaMailman	Intake/Exhaust	12	01-26-2011 04:25 PM
Fang Vents: Forced air DIY....>	Modshack	Intake/Exhaust	4	06-29-2009 10:49 AM
Found a prize in my left airbox	molamann	Nissan 370Z General Discussions	17	05-19-2009 08:12 PM