DIY: Triple Gauge Cluster

Akbubba47

Bump for future reference

__________________
2009 PW Touring. 6sp, Volk TE37's, MXP catback, and high flow cats.

L33T Z34

When I replaced my useless triple meter w/Défis I just wedged my three big fingers under the plastic hoods, which is the darker plastic that touches the dash. Don't pull on the visors, they will break off easily from the hoods. Once you get your three big fingers wedged under the front (closer to the windshield) hood and dash, just pull back towards where you're seated like a mothafawker and the whole thing will give- hood, visor and probably the bezel too! No need to use hook/pick. Do @ your own hood/bezel risk!

Attached is my demoed triple meter.


Part numbers for these POS:
Triple meter - 24845-1EA1A
Left hood - 68112-1EA0A
Center hood – 68113-1EA0A
Right hood – 68114-1EA0A
Bezel (all same) - 68236-1EA0A

Attached Images

Triple Meter Pwnd 2.jpg (173.0 KB, 278 views)