He said both were bought on ebay, I'd try that.

Did mine yesterday
boot from autotrimming on ebay
GTR shift know from Jordo :tup:

Pretty f-ing sweet.

Sweet -- that came out really nice! Enjoy :tiphat:

The M45 knob and boot combo looks really excellent -- nicely done, sir :tup:

BTW, I HIGHLY recommend the swapping of the up/down position for shifting (see further http://www.the370z.com/diy-section-d...irections.html ), it feels 100x more natural, and I find myself using the shifter more than the paddles since having done it.

Jimmy - link to the ebayer selling the boots.

autotrimming on eBay

Legit seller - I can vouch for him.

good product, fast shipping.

Is it me or is autotrimming isn't selling the 370z shift boot anymore? I can't find in his store anywhere... anyone has better luck?

I emailed the seller and he said he would upload the shift boot by this week

Awsome, thanks for the heads up

Picked up the perforated M45 knob, matches the steering wheel nicely and sits a little lower. The auto shifter ring keeps popping up, so I got the manual ring as well. Hopefully I'll get around to installing everything in the next week or two, but I attached the knob in the meantime.
In case anyone is interested, the M45 knob finisher is available as a stand alone part.
34929-EG000
34126-EG000 (Zip tie can probably substitute)
http://www.ocinfinitiparts.com/nissa...0/J96900JK.jpg
http://www.the370z.com/members/pl4ti...-shifter-1.jpg http://www.the370z.com/members/pl4ti...-shifter-2.jpg

EDIT: After a bunch of dremel work & test fitting, I installed the OEM manual boot console. Also took the gamble of picking up a Murano hazard button to match the black of the aux power cap from my 7AT Aux Power Outlet Relocate DIY.
Unfortunately it wasn't quite the same size as the OEM silver one and the button insert in the console had to be sanded a bit wider to accommodate. Even though it snaps into place, the button is oriented 90° differently..the hazard symbol is more driver centric I suppose :icon17:

http://www.the370z.com/members/pl4ti...m6-console.jpg http://www.the370z.com/members/pl4ti...m6-console.jpg

A Dremel is definitely a must for the alternate method, updated my post above with results. Overall, fairly happy with how it turned out.

Sub for use


Sent from my iPhone using Tapatalk

Man that looks clean Platinumfit, Very nice! also thanks for the M45 knob finisher part number, very useful.

AutoTrimming is finally back with some awsome leather shift boot on Ebay, thank god, been waiting on them for nearly a month now :D

I noticed they sell an e-brake boot as well. Anybody try that out?

Fits 2008 2014 Nissan 370Z Real Leather E Brake Shift Boot Gray Stitch | eBay