DIY 370Z Car Ramp Drawings

Baer383 · 04-20-2011, 05:33 PM

Quote:

Originally Posted by Cmike2780

Yes, I did these drawings. I basically used the slope of the race ramps and extended the flat spot a little bit. I still need to take actual measurements to make sure my evo-r lip clears. That's why it's so long. The grip tape is a good idea and I'll incorporate that into the plans.

I don't think I'll need leverage for the back, the weight of car will keep it planted once it's on the ramp.

Those are nice detailed drawing but keep in mind they are for ABS plastic ramps,it is a good design you have just watch how big you go b/c you have to move and store them.

Cmike2780 · 04-20-2011, 05:42 PM

Quote:

Originally Posted by Baer383

Those are nice detailed drawing but keep in mind they are for ABS plastic ramps,it is a good design you have just watch how big you go b/c you have to move and store them.

Thanks. I'm gonna revise it to make it lighter. Maybe use flat 2x4's for the steps except for the bottom one.

Nismo221 · 04-20-2011, 05:43 PM

Looks good, you can tell you put sometime and thought into it

04-20-2011, 05:43 PM	#3 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 37 Posts: 489 Drives: 2010 370z Nismo Rep Power: 16	Looks good, you can tell you put sometime and thought into it __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drawings for 2-piece, 2-stage incline Race Ramps	Fred@ReverseLogic	Reverse Logic Limited	5	03-05-2011 07:49 AM
Video: Stock 370z 0-65 (no launch) and free way on ramp (10-90) vid	houkouonchi	Nissan 370Z Photos / Spyshots / Video / Media Gallery	0	01-14-2011 04:05 AM
Rino Ramp + 2X4	cujo	DIY Section (Do-It-Yourself)	5	11-24-2010 05:06 PM
what is a 2x4 extension ramp?	zmyride	DIY Section (Do-It-Yourself)	15	05-13-2010 10:30 PM
Custom Ramp	YamahaR6	Canada	15	02-02-2010 10:30 PM