DIY 370Z Car Ramp Drawings

flashburn · 04-20-2011, 04:29 PM

Yeah, that should work fine. I do the same thing but with just 2 2x4x12 pieces. But I only use them so I can jack the car up, not to actually do any work underneath. You're right about them being heavy though. But the side benefit of that is you won't need to worry about them sliding as much as I do with mine, especially since I have a painted garage floor.

Baer383 · 04-20-2011, 04:45 PM

Yeah that will work but they are way to long and are going to be heavy.

I just built a set this weekend out of 2x10's the bottom one is 4ft,then 3ft, then 2ft, then 1ft,last I put a 8in piece vertical on the end straight up for a stop.And I put grip tape down the center for traction and on the bottom so is does not slip on the garage floor.

these are easy to store I just put them on top of the refrigerator in the garage.
Also my car is lowered 1.25in on the front 1.0in on the back and the chin spoiler never touches it.

04-20-2011, 04:29 PM	#1 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 20	Yeah, that should work fine. I do the same thing but with just 2 2x4x12 pieces. But I only use them so I can jack the car up, not to actually do any work underneath. You're right about them being heavy though. But the side benefit of that is you won't need to worry about them sliding as much as I do with mine, especially since I have a painted garage floor. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

04-20-2011, 04:45 PM	#2 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 31	Yeah that will work but they are way to long and are going to be heavy. I just built a set this weekend out of 2x10's the bottom one is 4ft,then 3ft, then 2ft, then 1ft,last I put a 8in piece vertical on the end straight up for a stop.And I put grip tape down the center for traction and on the bottom so is does not slip on the garage floor. these are easy to store I just put them on top of the refrigerator in the garage. Also my car is lowered 1.25in on the front 1.0in on the back and the chin spoiler never touches it. __________________ 2013 ZL1 754 rwhp 747 rwtq Last edited by Baer383; 04-20-2011 at 04:51 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drawings for 2-piece, 2-stage incline Race Ramps	Fred@ReverseLogic	Reverse Logic Limited	5	03-05-2011 07:49 AM
Video: Stock 370z 0-65 (no launch) and free way on ramp (10-90) vid	houkouonchi	Nissan 370Z Photos / Spyshots / Video / Media Gallery	0	01-14-2011 04:05 AM
Rino Ramp + 2X4	cujo	DIY Section (Do-It-Yourself)	5	11-24-2010 05:06 PM
what is a 2x4 extension ramp?	zmyride	DIY Section (Do-It-Yourself)	15	05-13-2010 10:30 PM
Custom Ramp	YamahaR6	Canada	15	02-02-2010 10:30 PM