Q regarding Pioneer AVIC Z120BT installation.

FastPaced · 03-16-2011, 07:56 PM

Hi guys. The 370Z is my first car so I'm relatively new to everything and anything that has to do with messing with the car. I just bought an AVIC Z120BT and a PAC steering wheel control. I just wanted to know, is there anything else that I need to get to have this installed and function properly?

FastPaced · 03-19-2011, 11:53 PM

Bump

jagodago · 03-20-2011, 10:38 PM

Antenna adapter and wiring harness adapter (Scoshe NAA2B and NN04B are what I used on my Z110BT) and you should be set. Unless you want to add the extra cable required for your ipod and a back-up camera then you will need those.

FastPaced · 03-21-2011, 04:58 AM

Thanks. I did buy the antenna adapter/wiring harness/rear view camera and ipod cable. I just wanted to confirm that the first two were essential to installation. I should be installing it sometime this weekend.

jagodago · 03-21-2011, 07:16 PM

You might also want to bypass the parking brake lockout I found this video fairly helpful but I don't know if anything has changed between the z110 and z120.

03-16-2011, 07:56 PM	#1 (permalink)
FastPaced Enthusiast Member Join Date: Mar 2011 Location: Bronx, NY Posts: 372 Drives: '08 SFP IS-F Rep Power: 14	Q regarding Pioneer AVIC Z120BT installation. Hi guys. The 370Z is my first car so I'm relatively new to everything and anything that has to do with messing with the car. I just bought an AVIC Z120BT and a PAC steering wheel control. I just wanted to know, is there anything else that I need to get to have this installed and function properly?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenwood DNX9960 vs. Pioneer AVIC-Z120BT	370zFORme!!	Audio & Video	21	12-30-2010 03:44 PM
Pioneer AVIC-X920BT	JayYoon	Audio & Video	52	08-21-2010 12:21 AM
Pioneer AVIC-z120BT Do I need a dash kit	Flyboy	Audio & Video	19	08-04-2010 08:22 AM
Just yanked the z120BT Pioneer and replaced with Alpine W900BT	Zuppy51	Audio & Video	25	08-02-2010 03:56 PM
Pioneer AVIC F900BT	3SeventyZ	Audio & Video	3	06-23-2009 01:48 PM

03-19-2011, 11:53 PM	#2 (permalink)
FastPaced Enthusiast Member Join Date: Mar 2011 Location: Bronx, NY Posts: 372 Drives: '08 SFP IS-F Rep Power: 14	Bump

03-20-2011, 10:38 PM	#3 (permalink)
jagodago Base Member Join Date: Oct 2009 Location: Austin, Tx Posts: 14 Drives: 09-370Z-Black-7spd Rep Power: 15	Antenna adapter and wiring harness adapter (Scoshe NAA2B and NN04B are what I used on my Z110BT) and you should be set. Unless you want to add the extra cable required for your ipod and a back-up camera then you will need those.

03-21-2011, 04:58 AM	#4 (permalink)
FastPaced Enthusiast Member Join Date: Mar 2011 Location: Bronx, NY Posts: 372 Drives: '08 SFP IS-F Rep Power: 14	Thanks. I did buy the antenna adapter/wiring harness/rear view camera and ipod cable. I just wanted to confirm that the first two were essential to installation. I should be installing it sometime this weekend.

03-21-2011, 07:16 PM	#5 (permalink)
jagodago Base Member Join Date: Oct 2009 Location: Austin, Tx Posts: 14 Drives: 09-370Z-Black-7spd Rep Power: 15	You might also want to bypass the parking brake lockout I found this video fairly helpful but I don't know if anything has changed between the z110 and z120.