|
Found another way to install the cover, in case others want to do this that have the G3 Intakes. You can just remove around 4-5 bolts that attach the bumper
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
12-12-2010, 02:31 PM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: May 2009
Location: Central Florida
Posts: 1,884
Drives: '12 Corvette GS 6M
Rep Power: 21  |
Found another way to install the cover, in case others want to do this that have the G3 Intakes. You can just remove around 4-5 bolts that attach the bumper to the plastic undertray, and then pull it down a bit, then slip your hands in there to remove or put on the cover. You'll probably still need to take off the bumper once just to get the velcro on good, but after that, you won't have to remove the bumper.
__________________
Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler | Dustin@Z1 | Engine & Drivetrain | 158 | 03-10-2014 02:27 PM |
| WTB: Red Nismo Engine Cover (original only, not painted) - $100 to you + silver cover | '10Anamoly | Wanted | 0 | 11-05-2010 07:33 AM |
| Oil Cooler.....Trans Cooler... | kannibul | Engine & Drivetrain | 6 | 12-31-2009 06:32 PM |
| Wanted: cover for those @#$!*^!& holes in the cover between radiator and bumper | wstar | Wanted | 3 | 04-08-2009 04:51 PM |
9Likes
Hybrid Mode
