![]() |
F U C K ME! On backorder everywhere!
|
|
Quote:
|
After seeing it in person, seems like the stock one flows better, but the red one looks racey.
|
I'm tracking this down around the world lol! I have a buddy of mine who is stateside but works with companies in Japan. Let's see if I can get my hands on one.
|
West Covina Nissan got mine in 5 days when it was on backorder. Just got it today and installed it. I agree that its 100% better looking in person than you can tell in the pictures. Its a glossy, metallic red that just screams "push me".
|
I ordered mine from west covania Nissan, also. I got mine today and installed.
|
Really? Let me try right now.
|
Mine is still backordered. Ordered 6/28. Still waiting. :(
|
Quote:
|
No idea, but I'll help you install it whenever it comes in. 10-12 min job tops. :tiphat:
|
Bump.
|
Still on backorder but they said that they would recieve them by the last week of July.
|
Quote:
mine is on back order from a dealer too :( |
i ordered mine last thursday got it yesterday, and damn it is nice... :)
Thanks for the DIY! my parts guy told me that there were some 45 on back order for the nation i assume most of them coming from this thread! |
Quote:
(went out today BTW). |
I ordered mine from the Courtesy Nissan website, it took about a week. I'm glad I ordered mine before everyone started too. No backorder 4 me :tup:
|
Quote:
j/k Ordered mine 6/28. Still waiting. |
lol, did they give you a tracking number?
|
Quote:
|
Oh, my mistake 6/26.
No tracking number. Still shows backordered on my order. I need a red button. Tired of looking tehgrey :superghey: button. |
Quote:
|
Quote:
|
Oh right lol!! Hell yea you do! :D
|
Hang in there Guys :hello:
|
I ordered mine last Tuesday and got it today from Courtesy Parts. They said it was on backorder, but it shipped 2 days after the order. Installation/pics this weekend!
|
OK! I just ordered from Courtesy Parts and from Covina. Let's see who gets it to me first! :ughdance:
|
Anyone online that's done this installation? I've finally got everything taken apart (different than the OP, to my surprise) but the OEM ignition assembly isn't pulling out of the housing. I've tried "compressing the sides", and it's not budging. If I squeeze anymore, it's gonna make like a zit and plastic pieces are gonna fly all over the place.
Anyone have trouble pulling the old ignition out? |
Quote:
http://images50.fotki.com/v1570/phot...SCF0827-vi.jpg Here's the close up of one of them. http://images54.fotki.com/v544/photo...SCF0829-vi.jpg |
Silly me, I was trying to pull backwards out of the housing instead of forward. I didn't notice that detail in the pic, but if it were a snake, It would have bitten me!
Ugh, turned a 5 min DIY to a 45 min DIY. Looks fantastic! I also noticed in your pics you removed the knee rests, but I didn't see it typed out anywhere. Am I missing it? Because it didn't seem possible for me to do this without taking those off, which also required taking out 2 more screws. |
Quote:
El Cajon, CA 92020 Parts: (888) 318-2390 don't know the zip off the top of my head. |
I also had to take the kneepads off to get this done right for my car (stick shift). There is one screw holding them down and the rest are metal snap clips. They come off pretty easily. :)
|
Quote:
|
No prob, thanks to you for the OP.
|
did mine
2 Attachment(s)
Got mine they were in back order too. I did mine over the weekend and i decided to paint it too.
|
Quote:
|
Hey guys we are getting a shipment of GTR buttons next week I'll let you know when they come in, thank you for your patience!
-Scott |
So if I order today when would I receive it?
|
Quote:
Subliminal message to follow... (order #8315) :tiphat: |
Quote:
Quote:
-Scott |
All times are GMT -5. The time now is 02:06 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2