DIY: Berk Technology HFC Install

brennanvc · 03-24-2018, 09:19 AM

-update- VDC light was from steering wheel angle sensor. I disconnected the steering knuckle while installing the driver's side HFC and had to spin it around to reconnect it. The only way I could find to reset it was a Nissan Consult function mentioned in the FSM. I tried Nissan Data Scan III coupled with a bluetooth OBD diagnostic scanner (OBDlinx LX), but Nissan Data Scan II is the only version that has the Work Support functions for the ABS system (which is where Steering Wheel Angle Sensor Reset is located). I had to take the car to the dealer to reset the sensor, for which they charged me for one hour of labor.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Berk Technology Earth Day HFC Sale!!!	BerkTech	Exhaust/Intake	8	04-16-2012 01:46 PM
Berk Technology Cat-Back Coming Soon!	M.Bonanni	Intake/Exhaust	468	08-14-2009 09:36 PM

03-24-2018, 09:19 AM	#38 (permalink)
brennanvc Base Member Join Date: Dec 2017 Location: Clearwater Posts: 2 Drives: '14 370Z AT Rep Power: 8	-update- VDC light was from steering wheel angle sensor. I disconnected the steering knuckle while installing the driver's side HFC and had to spin it around to reconnect it. The only way I could find to reset it was a Nissan Consult function mentioned in the FSM. I tried Nissan Data Scan III coupled with a bluetooth OBD diagnostic scanner (OBDlinx LX), but Nissan Data Scan II is the only version that has the Work Support functions for the ABS system (which is where Steering Wheel Angle Sensor Reset is located). I had to take the car to the dealer to reset the sensor, for which they charged me for one hour of labor.