|
Yea, I have aftermarket tweeters installed, so I was worried it would tug on the wire if I were to attempt to lift up the dash. When I worked on
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
07-08-2010, 08:05 AM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 43   |
Yea, I have aftermarket tweeters installed, so I was worried it would tug on the wire if I were to attempt to lift up the dash. When I worked on the combination meter, I didn't have to remove the steering wheel at all.
It'll be nice to be able to tilt the dash enough to get to the screws, but I've not done enough investigating to do so. I'm still determined to get the aftermarket set on (boost, oil press, and oil temp), but a shop will do that when the time comes 
__________________
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| STRI Oil Pressure Gauge... Amber 52mm to replace your clock ! | travisjb | Parts for sale (Private Classifieds) | 33 | 03-09-2010 06:02 PM |
| Oil Pressure Gauge | jpit | Exterior & Interior | 6 | 03-07-2010 08:36 PM |
| Oil cooler install Request | Stealth_Z | DIY Section (Do-It-Yourself) | 4 | 12-17-2009 03:34 PM |
| Oil Pressure Gauge | 37Z | Exterior & Interior | 0 | 06-14-2009 09:21 PM |
| What happened to the tire pressure gauge and speedo in the middle gauge cluster? | rbratton | Nissan 370Z General Discussions | 33 | 01-24-2009 10:28 PM |
2Likes
Hybrid Mode
