Rear Valance or Fangs blacked out

tjlazer · 05-07-2011, 06:48 PM

How has the front fangs held up to the rock chips OP?

lochness · 05-08-2011, 08:48 PM

Here's a couple pics. Still need to do a little bit of touching up. It looks really good.

Minicobra1 · 05-08-2011, 08:57 PM

Quote:

Originally Posted by lochness

I've taken off all the tape but I'm waiting about a day and half before I drive it. Its looking good so far.

The guy across the street started mowing his lawn and was kicking up dust, so I drove down the street to a parking lot and finished spraying on the clear coat there. I waited about 30 min to dry, then drove off and never looked back :-)

I've had it done for almost 2 years and 20k miles, no more rock chips or damage then the original surrounding paint. :-)

njustidokite · 05-27-2011, 11:16 AM

Great thread just did mine today. Thanks for showing us how its done.

HoneyBadger · 05-27-2011, 12:26 PM

Finally gonna try this over the weekend.

TexasZ34 · 06-13-2011, 09:03 PM

Car looks great.

370ZilverZ · 01-15-2012, 03:12 PM

We have some warm days coming in. I'm going to get started on mine. Great thread and kuddos to all that posted your pics.

nmjaxx9 · 01-15-2012, 04:23 PM

Thinking of doing this now....maybe

Grindkiezer · 10-22-2012, 01:29 PM

How do you mask a straight line in between the valance and bumper gap?

VDC_OFF · 10-22-2012, 01:59 PM

use a lot of patience and try to do short sections along the curve and long strips around the straights. Also make sure you sand in side that edge good because you dont want the paint to peel off when you take the tape off. Here he sanded after he taped which is a better idea then what i did which was sanding before. I had to be carefull not to take the gloss off the parts i didnt want painted. For a clean line, I suggest using the blue tape that says edge lock or something like that. Regular blue tape sucks imo and I have to touch up some parts. Keep some paint thinner handy just incase you mess up. You can dab a little on a cloth and wipe it right off if you have over spray somewhere.

nmjaxx9 · 10-22-2012, 06:31 PM

Quote:

Originally Posted by nmjaxx9

Thinking of doing this now....maybe

changed my mind, too many people doing it, lets be different.

Grindkiezer · 10-23-2012, 01:11 AM

Quote:

Originally Posted by VDC_OFF

use a lot of patience and try to do short sections along the curve and long strips around the straights. Also make sure you sand in side that edge good because you dont want the paint to peel off when you take the tape off. Here he sanded after he taped which is a better idea then what i did which was sanding before. I had to be carefull not to take the gloss off the parts i didnt want painted. For a clean line, I suggest using the blue tape that says edge lock or something like that. Regular blue tape sucks imo and I have to touch up some parts. Keep some paint thinner handy just incase you mess up. You can dab a little on a cloth and wipe it right off if you have over spray somewhere.

I've tried to plasti dip it 3 times now and every time, no matter how much I spray (to peel it when it's wet) or how soon I try to peel the tape off after that, the edges lift so I just end up removing the whole thing rather than just having a ghetto looking paint job on it. I might just end up doing a CF wrap or flat black wrap on it, but we'll see.

VDC_OFF · 10-23-2012, 08:46 AM

I know nothing about plastidip as i try to stay away from the stuff. I used a flat black paint can from autozone but made sure it said for plastics

nmjaxx9 · 10-23-2012, 06:19 PM

Quote:

Originally Posted by Grindkiezer

I've tried to plasti dip it 3 times now and every time, no matter how much I spray (to peel it when it's wet) or how soon I try to peel the tape off after that, the edges lift so I just end up removing the whole thing rather than just having a ghetto looking paint job on it. I might just end up doing a CF wrap or flat black wrap on it, but we'll see.

You dont wanna peel too soon, that makes it look uneven, spray a coat with 10 min intervals and then when you are finally done, wait 5-8 mins and slowly peel off the tape. Theres a DIY video on here somehwere for it just youtube it!!

Grindkiezer · 10-23-2012, 06:34 PM

Quote:

Originally Posted by nmjaxx9

You dont wanna peel too soon, that makes it look uneven, spray a coat with 10 min intervals and then when you are finally done, wait 5-8 mins and slowly peel off the tape. Theres a DIY video on here somehwere for it just youtube it!!

I thought that since the area that I was spraying doesn't have a sharp edge that it won't make a clean cut on it's own, so you have to try and pull the tape out of the valence and bumper crevice while it was still wet?

Trying this while the dip has dried would make it so that the dip does not cut but it will tear and give me the same problems that I already have.

05-07-2011, 06:48 PM	#31 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	How has the front fangs held up to the rock chips OP? __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

05-27-2011, 12:26 PM	#35 (permalink)
HoneyBadger Base Member Join Date: Apr 2011 Location: Knoxville, TN Posts: 67 Drives: 2010 PG 370z Rep Power: 15	Finally gonna try this over the weekend. __________________ HoneyBadger don't care.

01-15-2012, 03:12 PM	#37 (permalink)
370ZilverZ A True Z Fanatic Join Date: Dec 2011 Location: DFW, TX Age: 68 Posts: 2,321 Drives: '11 BMW Z4 Rep Power: 19	We have some warm days coming in. I'm going to get started on mine. Great thread and kuddos to all that posted your pics. __________________ 370ZilverZ Journal BMW Z4

10-22-2012, 01:29 PM	#39 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 14	How do you mask a straight line in between the valance and bumper gap? __________________ Z

10-22-2012, 01:59 PM	#40 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 45 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	use a lot of patience and try to do short sections along the curve and long strips around the straights. Also make sure you sand in side that edge good because you dont want the paint to peel off when you take the tape off. Here he sanded after he taped which is a better idea then what i did which was sanding before. I had to be carefull not to take the gloss off the parts i didnt want painted. For a clean line, I suggest using the blue tape that says edge lock or something like that. Regular blue tape sucks imo and I have to touch up some parts. Keep some paint thinner handy just incase you mess up. You can dab a little on a cloth and wipe it right off if you have over spray somewhere. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

05-27-2011, 11:16 AM	#34 (permalink)
njustidokite Enthusiast Member Join Date: Oct 2010 Location: Long Island, NY Posts: 297 Drives: 09' 370z Blue,TS Rep Power: 15	Great thread just did mine today. Thanks for showing us how its done.

06-13-2011, 09:03 PM	#36 (permalink)
TexasZ34 Base Member Join Date: Jun 2011 Location: Houston, Tx Posts: 78 Drives: 10 40TH 370Z KAV M6 Rep Power: 15	Car looks great.

01-15-2012, 04:23 PM	#38 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 27	Thinking of doing this now....maybe

10-23-2012, 08:46 AM	#43 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 45 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	I know nothing about plastidip as i try to stay away from the stuff. I used a flat black paint can from autozone but made sure it said for plastics __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Blacked Out Fangs...	simota1	DIY Section (Do-It-Yourself)	160	06-02-2014 07:51 PM
drZ new fangs and roof	drZ	Member's 370Z Gallery	14	03-16-2010 02:34 PM
front fangs	Richie	Nissan 370Z General Discussions	34	12-08-2009 07:42 PM
Blacked out fangs/headlight LED's Briliant silver	M1K3	Exterior & Interior	11	08-24-2009 12:19 PM