O2 Sensor Wiring - Hijack

JeffP-Z · 02-04-2022, 03:14 PM

Quote:

Originally Posted by THE BULL

Here you go

TY The Bull.

FrankEtier · 06-29-2022, 07:33 AM

Quote:

Originally Posted by JeffP-Z

TY The Bull.

I'm hooking up the fuel pressure sensor to my Bank 1 rear O2 sensor via Ecutek Hijack. I see from the FSM that Wire position 3 & 4 on the O2 connector both go to the ECM. Which is the signal wire? I'm thinking it is position 4 but hoping someone can confirm.

Thanks

THE BULL · 06-29-2022, 09:24 AM

For bank 1 it shows #76 as the input which is labeled W for white and according to the connector #4 is the W

For bank 2 it shows #80 as the input which is labeled O for orange and according to the connector #4 is the O

FrankEtier · 06-29-2022, 03:44 PM

Thanks for confirming.

Largeski · 03-19-2023, 03:22 PM

Sorry to bring this back up, im trying to hijack sensor 2 bank 1 and now just getting confused whether signal is black or white? looks like white for input on here (and if so which one?) but I haver seen other diagrams showing Black. Any help much appreciated!!

06-29-2022, 03:44 PM	#4 (permalink)
FrankEtier Base Member Join Date: Jul 2019 Location: McKinney, TX Age: 50 Posts: 145 Drives: 2014 370Z SC Rep Power: 11606	Thanks for confirming. __________________ ‘14 Topgunz Speedworks Rotrex Supercharged VR30 7AT 370Z Magma Red. @liquid.magma

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wiring for the Pass seat weight sensor?	gomer_110	Exterior & Interior	39	12-25-2021 07:00 PM
Ethanol Sensor Wiring	abm89	Engine & Drivetrain	2	08-13-2021 06:27 PM
Oil Temp sensor wiring harness issues	OilLeaks	Engine & Drivetrain	18	04-18-2020 08:34 AM
Crank sensor wiring	Arrvaxx	Engine & Drivetrain	3	07-02-2018 04:52 PM
[FOR SALE] AEM Air/Fuel ratio WIDEBAND gauge with sensor and wiring	Kim@Forged	Parts for sale (Private Classifieds)	1	04-12-2013 04:13 PM

06-29-2022, 09:24 AM	#3 (permalink)
THE BULL Base Member Join Date: Apr 2021 Location: Florida Posts: 216 Drives: G37S Rep Power: 26850	For bank 1 it shows #76 as the input which is labeled W for white and according to the connector #4 is the W For bank 2 it shows #80 as the input which is labeled O for orange and according to the connector #4 is the O

03-19-2023, 03:22 PM	#5 (permalink)
Largeski Base Member Join Date: Oct 2021 Location: Alberta Posts: 4 Drives: 370z Rep Power: 5	Sorry to bring this back up, im trying to hijack sensor 2 bank 1 and now just getting confused whether signal is black or white? looks like white for input on here (and if so which one?) but I haver seen other diagrams showing Black. Any help much appreciated!!