Anyone with a windshield removal DIY??

OxZed · 06-07-2018, 08:09 PM

Quote:

Originally Posted by GaleForce

I would pull the dash, do the work, reinstall.

I agree … I've pulled two dashes; it's not that hard of a job.

Hint you'll need … release the plastic pins from "under the dash" with long needle-nose pliers. You'll know what I mean when you get there.

GaleForce · 06-08-2018, 08:37 AM

Quote:

Originally Posted by OxZed

I agree … I've pulled two dashes; it's not that hard of a job.

Hint you'll need … release the plastic pins from "under the dash" with long needle-nose pliers. You'll know what I mean when you get there.

I assume you are talking about the pins at the windshield vents... That was the most difficult part of the entire dash removal, and it wasn’t even that difficult.

GaleForce · 06-08-2018, 08:42 AM

Quote:

Originally Posted by RonRizz

Really?? do you think it would be that much easier?
I've never done one before, but to ME that seems like a daunting task.
Bear in mind I'm over 50, Shoulder replaced, Knee replaced, round in the middle, so I don't bend and stretch like I did 20 years ago... Lol
Don't get me wrong, I'm not afraid to attempt nearly any task, and am quite mechanically inclined, so maybe I'll look into that route.

I have had my windshield replaced... I would rather RE&RE the dash vs. the windshield.

The dash removal is fairly straight forward. Follow the FSM, you can have it removed within 2 hours... We are in similar life stages. If I can do it, you’ll be able to, too.

axmea? · 06-08-2018, 09:11 AM

It's been a while but after doing it a few times in one of my previous cars dash removal took me less than 30 min. if I remember correctly. The issue with the Z is how tight it is to work on for big guys.

axmea? · 06-08-2018, 09:13 AM

Quote:

Originally Posted by GaleForce

I would pull the dash, do the work, reinstall.

From the master himself.

RonRizz · 06-08-2018, 10:12 AM

Quote:

Originally Posted by axmea?

it's been a while but after doing it a few times in one of my previous cars dash removal took me less than 30 min. If i remember correctly. The issue with the z is how tight it is to work on for big guys.

this

GaleForce · 06-08-2018, 11:58 AM

Quote:

Originally Posted by RonRizz

this

Quote:

Originally Posted by axmea?

It's been a while but after doing it a few times in one of my previous cars dash removal took me less than 30 min. if I remember correctly. The issue with the Z is how tight it is to work on for big guys.

From my experience,

Step 1- remove the seats.
Step 2- remove the console
Step 3- follow the FSM to remove the dash.

Plenty of room to work once the seats and console are out.

GaleForce · 06-08-2018, 12:05 PM

To remove the windshield you need to remove the b-pillars (the tabs will more than likely break), remove the outer a-pillars, remove the wipers and lower cowl, and unplug the rear view mirror. Once that’s done you need to cut out the windshield and find a safe place to store it. The glass and metal frame on the vehicle need to have the left over urethane removed prior to installation. The glass should have guides on it to help with alignment/spacing during the installation process.

20IOZ · 10-10-2018, 03:52 AM

It might be too late, but try this guide!

https://glassmagazine.com/article/au...an-370z-106478

06-08-2018, 09:11 AM	#19 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,243 Drives: WELL ZED PW 6MT Rep Power: 53242	It's been a while but after doing it a few times in one of my previous cars dash removal took me less than 30 min. if I remember correctly. The issue with the Z is how tight it is to work on for big guys. GaleForce likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

06-08-2018, 12:05 PM	#23 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	To remove the windshield you need to remove the b-pillars (the tabs will more than likely break), remove the outer a-pillars, remove the wipers and lower cowl, and unplug the rear view mirror. Once that’s done you need to cut out the windshield and find a safe place to store it. The glass and metal frame on the vehicle need to have the left over urethane removed prior to installation. The glass should have guides on it to help with alignment/spacing during the installation process. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

10-10-2018, 03:52 AM	#24 (permalink)
20IOZ Base Member Join Date: May 2011 Location: Australia Posts: 39 Drives: 2017 370Z M6 Rep Power: 15	It might be too late, but try this guide! https://glassmagazine.com/article/au...an-370z-106478 __________________ Amuse / Whiteline / EBC / Z1 / Volk / Top Secret / Mines / JL / Hertz / Audiocontrol / Top Speed / K&N / EcuTek / Fast Intentions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new windshield pitting	scott36854	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	2	03-06-2016 06:49 AM
Windshield?!?!?	Dland10	Exterior & Interior	10	10-26-2013 11:32 AM
Windshield Wipers Do Not Clean Entire Windshield	daisi145	Exterior & Interior	19	04-23-2012 07:37 AM
Windshield Wonder	LunaZ	Exterior & Interior	1	05-08-2010 05:35 PM
windshield	polarity	Nissan 370Z General Discussions	10	10-27-2009 04:37 PM