HardWire for Invisicord MirrorWire (Escort Radar)

cooltoy

I got your PM.

Unfortunately my car is under the cover in storage for the winter. I guess I can climb under there if you need a picture.

I used one of the DIY here. But I can not find it. You need to pull out the plug in harness to the mirror and then the wiring for the mirror is:

black/red - switched power
yellow - always on power
black - ground

so plug the yellow wire of the invisicord into the harness where the black/red wire is. Plug the black invisicord into the harness where the black wire is. Plug back in the harness and you are done!

If you have a 2014 and up, its black/red, black/white and black/yellow wires.

Black invisicord goes to black/white, red goes to black red.

Maybe this video will help.

https://www.youtube.com/watch?v=nD5iZcwA08k

__________________

Joker_J

Thanks! I'll have to take a look at it tomorrow or Friday when I attempt it lol
Yea, the invisicord that I purchased only has a red and black tip, no yellow :/