Unofficial Poll: Harder - Front or Rear Suspension Work

OTW Z-Boy · 04-09-2016, 09:00 PM

Quote:

Originally Posted by dP3NGU1N

As a start I just eyeballed it close to stock length. You're definitely going to need an alignment front and back (assuming you got arms for the rear). Hopefully you also got some lockouts for the rear if you got rear arms.

After that, set your ride height. Before you finalize, drive or roll the car back and forth so the springs seat properly and adjust ride height as necessary. Car must be rolled or driven each time to ensure proper spring seating. Then go get an alignment.

Awesome info. Yes set the front arms with 4 threads out at the bearing arm and 5 threads in at the adjustment points. About a 1/4" shorter than the oem arm.

And yes got arms for the rear and the eccentric kit. Would you be able to shed some light on the toe bolts install?

Will a dremel do the work to elongate the holes or is a shop gonna have to do it?

Thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] SPL front and rear, air suspension, VIP wheels	Dangkristine	Parts for sale (Private Classifieds)	16	05-23-2015 10:00 PM
which wheels? volk gt-s? or work meister s1? v.poll	rAiN	Wheels & Tires	18	09-06-2013 09:42 PM
Rear Sport Rims on Front - Will it work?	delusional	Wheels & Tires	18	08-13-2013 04:13 PM
WORK Meister S1 3P - 19x11.0 front \|\| 19x12.5 rear ** Custom GM Color	RavSpec	Tires/Wheels	7	01-09-2012 01:36 PM
WORK Meister S1 3P - 19x11.0 front and 19x12.5 Rear *** Custom GM color	RavSpec	RavSpec - JDMwheel	0	11-16-2011 01:13 PM