|
I could have used supplied spacer, that snaps on bottom of battery & raises it up about an inch; but liked the way it sit lower and flat in the
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
01-01-2016, 11:13 PM
|
#24 (permalink) |
|
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 59
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684396   |
I could have used supplied spacer, that snaps on bottom of battery & raises it up about an inch; but liked the way it sit lower and flat in the tray.
I turned around hold down strap (notice arrow facing rear) and put the short J bolt in the lowest hole / then used a spacer (chrome 1/4 inch drive socket) over threads of longer front J bolt and put nut down against it. Holds good & weight of battery is about 1" lower. Don't over tighten. Width of battery is a tad narrower/ so when I get back to work, gonna make a rubberized spacer to go between top of battery & brace.....could leave as is; but gonna pay attention to detail. 720cca 160$ (including tax) works like a charm. Btw.. Had to re-time my windows.  Sent from my iPhone using Tapatalk
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| No power after battery replacement... | OldFart | Engine & Drivetrain | 3 | 10-22-2014 12:22 PM |
| Windows won't go back up after battery replacement | daisi145 | Exterior & Interior | 3 | 01-08-2013 02:48 AM |
| Car Battery Replacement Options | 37Z | Audio & Video | 5 | 07-08-2012 06:08 PM |
| CTEK Battery Chargers - The Smartest Battery Chargers | vividracing | Drivetrain/Engine | 5 | 01-31-2012 01:53 PM |
| LTT H&R 10mm Stud Replacement Spacers for 15mm stud replacement H&R | chuckd05 | Parts for sale (Private Classifieds) | 5 | 02-16-2011 05:05 PM |
5Likes
Threaded Mode
