DFW Paint Protection Installer Recommendation

ltullos · 02-27-2013, 09:18 PM

For anyone looking for the best clear bra / paint protection installer in DFW, I can't recommend Norm Schilling at Invisibra enough. I'm new (2nd) owner of 40th AE #487, and took it to him this week to have the bumper, full hood, and front fenders done. He spotted a several small (<3 mm) spots on the lower part of the bumper that were going to be problems and applied a small piece of film to show me how it would look (like there was an air bubble). While I was disappointed to see this, I was much happier to know up-front! I'm sure many other installers would have just slapped it on without saying anything and then blaming the car for my dissatisfaction. I did have him go ahead and do the hood and fenders, and his work was flawless. He uses SunTek film which is only one to come in 60in width roll, and he noted that they are also the only company that dedicates their production tooling to paint protection film. This enables them to maintain much better control of their process and reduce particles or flaws that occurs when switching between PPF, vinyl wraps, and other products. PM me if you have questions.

cv129 · 02-27-2013, 11:14 PM

How much did he charge you if you don't mind me asking?

DEpointfive0 · 02-27-2013, 11:15 PM

Jeezus, that's A LOT of 40ths in Dallas now

ltullos · 03-09-2013, 12:23 PM

Full hood $495, Front fenders $325 ea, Front bumper $495. Check his website to see the difference between his work and the pretenders.

cv129 · 03-12-2013, 11:27 PM

Ah that's where my friend took his M3, cool!

02-27-2013, 09:18 PM	#1 (permalink)
ltullos Enthusiast Member Join Date: Feb 2011 Location: DFW Posts: 312 Drives: 2016 Nismo Tech MT Rep Power: 14	DFW Paint Protection Installer Recommendation For anyone looking for the best clear bra / paint protection installer in DFW, I can't recommend Norm Schilling at Invisibra enough. I'm new (2nd) owner of 40th AE #487, and took it to him this week to have the bumper, full hood, and front fenders done. He spotted a several small (<3 mm) spots on the lower part of the bumper that were going to be problems and applied a small piece of film to show me how it would look (like there was an air bubble). While I was disappointed to see this, I was much happier to know up-front! I'm sure many other installers would have just slapped it on without saying anything and then blaming the car for my dissatisfaction. I did have him go ahead and do the hood and fenders, and his work was flawless. He uses SunTek film which is only one to come in 60in width roll, and he noted that they are also the only company that dedicates their production tooling to paint protection film. This enables them to maintain much better control of their process and reduce particles or flaws that occurs when switching between PPF, vinyl wraps, and other products. PM me if you have questions.

02-27-2013, 11:15 PM	#3 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Jeezus, that's A LOT of 40ths in Dallas now __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What do people think of Clear Bra Paint Protection?	rbratton	Nissan 370Z General Discussions	304	01-18-2013 03:31 PM
Temporary Bra Cover Paint Protection	Bodytechz	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	5	01-20-2011 09:56 PM
Film paint protection	370Z Roadster	Exterior & Interior	1	09-27-2010 09:00 AM
Paint Protection	TripleBlkZ	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	6	07-29-2010 04:45 AM
DFW Paint Protection install	hfrog355	Exterior & Interior	3	04-22-2010 10:11 PM

02-27-2013, 11:14 PM	#2 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,193 Drives: 09 Nismo, 16 Nismo Rep Power: 159827	How much did he charge you if you don't mind me asking?

03-09-2013, 12:23 PM	#4 (permalink)
ltullos Enthusiast Member Join Date: Feb 2011 Location: DFW Posts: 312 Drives: 2016 Nismo Tech MT Rep Power: 14	Full hood $495, Front fenders $325 ea, Front bumper $495. Check his website to see the difference between his work and the pretenders.

03-12-2013, 11:27 PM	#5 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,193 Drives: 09 Nismo, 16 Nismo Rep Power: 159827	Ah that's where my friend took his M3, cool!