Bird droppings etched clearbra

sparky · 01-13-2013, 12:11 AM

Any ideas on how to get this off? Not sure just what I can use on the clear bra that won't damage it worse.

grant · 01-13-2013, 05:27 PM

How long did you let that crap sit there? I talked with my X-Pel guy today and he didn't think it should have eched the film. Maybe stained it, but that should bleach out, after a while (maybe use some Westly's White polish to help).

sparky · 01-13-2013, 11:25 PM

Quote:

Originally Posted by grant

How long did you let that crap sit there? I talked with my X-Pel guy today and he didn't think it should have eched the film. Maybe stained it, but that should bleach out, after a while (maybe use some Westly's White polish to help).

It was there for the day but was hard to remove. It may be just a stain but I did try a Menzerna fine cut polish on it to no effect. I'll try clay bar to see what that does. Just wasn't sure how aggressive to get on a plastic film. I'll leave it for a while after that and see if it fades.
Thanks for the reply.

Xplicit97 · 01-14-2013, 03:45 AM

Not to thread Jack but I have the same problem with mine except it's from.giant bugs on a road trip from WA to Cali.. any suggestions or am I SOL as well

Sent from my SPH-L710 using Tapatalk 2

DEpointfive0 · 01-14-2013, 05:06 AM

Quote:

Originally Posted by Xplicit97

Not to thread Jack but I have the same problem with mine except it's from.giant bugs on a road trip from WA to Cali.. any suggestions or am I SOL as well

Sent from my SPH-L710 using Tapatalk 2

Still in CA?

I used aggressive clay bar, and it takes crap out, as for ACTUAL etching... I haven't seen it

Xplicit97 · 01-14-2013, 06:42 AM

I am came.back down for work again.. minus the Z this time. Too short of trip and the passes are seriously nasty right now

Quote:

Originally Posted by DEpointfive0

Still in CA?

I used aggressive clay bar, and it takes crap out, as for ACTUAL etching... I haven't seen it

Sent from my SPH-L710 using Tapatalk 2

kenchan · 01-14-2013, 11:39 AM

UV can do wonders sometimes.

01-13-2013, 12:11 AM	#1 (permalink)
sparky Track Member Join Date: Jul 2011 Location: Vancouver, BC Posts: 642 Drives: 12 370Z GM AT Rep Power: 14	Bird droppings etched clearbra Any ideas on how to get this off? Not sure just what I can use on the clear bra that won't damage it worse. __________________ 2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

01-14-2013, 03:45 AM	#4 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 299	Not to thread Jack but I have the same problem with mine except it's from.giant bugs on a road trip from WA to Cali.. any suggestions or am I SOL as well Sent from my SPH-L710 using Tapatalk 2 __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Serious Bird Dropping...	damn_Zexy	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	11-07-2012 07:57 PM
What to do about the etched clear coat besides take up bird hunting?	Kirkster	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	28	01-07-2011 12:23 PM
removing bird droppings without re-washing the car	arcticreaver	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	51	09-12-2010 02:08 AM
Bird Strike	dogbeard	New Nismo 370Z Owner	3	03-21-2010 12:01 AM
What happens when you hit a bird at 120mph	frost	The Lounge (Off Topic)	39	07-19-2009 02:09 AM

01-13-2013, 05:27 PM	#2 (permalink)
grant Base Member Join Date: May 2012 Location: Georgia Posts: 128 Drives: AMG C43 Rep Power: 12	How long did you let that crap sit there? I talked with my X-Pel guy today and he didn't think it should have eched the film. Maybe stained it, but that should bleach out, after a while (maybe use some Westly's White polish to help).

01-14-2013, 11:39 AM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	UV can do wonders sometimes.