Detail without Clay?

daleks · 10-06-2011, 05:39 PM

Long story short, I'm taking my car in for an exterior detail and the shop apparently doesn't do a clay bar as part of the process. The person on the phone said using a clay bar is too rough on the paint and that they do a two step buff + polish process instead. This seems strange to me. Any thoughts? The shop was recommended.

AdamsPolishes · 10-06-2011, 05:48 PM

Sounds like the kind of shop you don't want to take your car to. Clay is not at all hard on your paint... worst case is some micro marring of the surface, which is then easily corrected in the polishing stages.

Any shop that wouldn't decontaminate your paint properly before buffing is not the kind of shop you want to allow to touch your car.

azn370z · 10-06-2011, 05:52 PM

If you use a fine clay and lube it wont scratch the paint. If you don't clay, the crap will still be stuck in the clearcoat.

Zemurray · 10-06-2011, 05:56 PM

I've used the meguires clay kit on a couple of cars, no way it scratches the paint. It works as advertised. Buffing does eventually wear through the clear coat, I would only buff if I absolutely had too and even then I'd put it off for as long as possible. You've only got so may buffs you can do.

dennis26 · 10-08-2011, 02:53 AM

They don't clay because the additional time would eat into their profit. Does not sound like the type of place you want to go to.

10-06-2011, 05:39 PM	#1 (permalink)
daleks Enthusiast Member Join Date: Apr 2010 Location: St. Louis Posts: 424 Drives: 2011 Evo X MR Rep Power: 15	Detail without Clay? Long story short, I'm taking my car in for an exterior detail and the shop apparently doesn't do a clay bar as part of the process. The person on the phone said using a clay bar is too rough on the paint and that they do a two step buff + polish process instead. This seems strange to me. Any thoughts? The shop was recommended.

10-06-2011, 05:48 PM	#2 (permalink)
AdamsPolishes The370Z.com Sponsor Join Date: Apr 2010 Location: SoCal Posts: 724 Drives: 2009 Avalanche Rep Power: 15	Sounds like the kind of shop you don't want to take your car to. Clay is not at all hard on your paint... worst case is some micro marring of the surface, which is then easily corrected in the polishing stages. Any shop that wouldn't decontaminate your paint properly before buffing is not the kind of shop you want to allow to touch your car. __________________ Use the code NISSANZ* at checkout to save 10% off your next order at www.AdamsPolishes.com*

10-06-2011, 05:52 PM	#3 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 489	If you use a fine clay and lube it wont scratch the paint. If you don't clay, the crap will still be stuck in the clearcoat. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clay bar newb	370zproject	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	33	11-02-2011 09:19 AM
Using Clay Bar - Excellent Results	Vapiano	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	8	07-04-2011 12:55 PM
Pinnicle clay bar	bigrob126	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	6	02-14-2011 09:04 PM
DA Medium Grade Clay Bar + DA Detail Spray + FREE DA Blue MF!!	DetailAddict	Detailing Products (wax, polish etc)	1	09-08-2010 09:46 AM
Waxing and using clay bar	CAN-ZED	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	3	07-15-2009 07:53 PM

10-06-2011, 05:56 PM	#4 (permalink)
Zemurray Base Member Join Date: Sep 2011 Location: La Grange, KY Posts: 117 Drives: 78 280z, 40th 370z Rep Power: 13	I've used the meguires clay kit on a couple of cars, no way it scratches the paint. It works as advertised. Buffing does eventually wear through the clear coat, I would only buff if I absolutely had too and even then I'd put it off for as long as possible. You've only got so may buffs you can do.

10-08-2011, 02:53 AM	#5 (permalink)
dennis26 Enthusiast Member Join Date: Aug 2011 Location: Alabama Posts: 314 Drives: 10 370z roadster Rep Power: 13	They don't clay because the additional time would eat into their profit. Does not sound like the type of place you want to go to.