They're baaack....

azn370z · 07-14-2011, 11:59 PM

When you dry you should blot the paint.

Phaddi_inc · 07-15-2011, 12:29 AM

Thanks.
I'll try that, I been for the most part holding it by 2 corners and pulling it towards me when drying...blotting it sounds like a "swirl safe" method, im going to pick up a leaf blower this weekend also...Hopefully it was my poor drying techniques that caused those swirls....

azn370z · 07-15-2011, 01:23 AM

I'm not sure if you do this but after you're done washing, you should take the nozzle off the hose and let water pour out of the hose and go over the z so it creates a sheeting action. The towel absorbs water better once the towel is damp.

07-14-2011, 11:59 PM	#1 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	When you dry you should blot the paint. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

07-15-2011, 01:23 AM	#3 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	I'm not sure if you do this but after you're done washing, you should take the nozzle off the hose and let water pour out of the hose and go over the z so it creates a sheeting action. The towel absorbs water better once the towel is damp. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

07-15-2011, 12:29 AM	#2 (permalink)
Phaddi_inc Base Member Join Date: Apr 2011 Location: Ontario Canada Posts: 111 Drives: 09 Nissan 370Z 6spd Rep Power: 15	Thanks. I'll try that, I been for the most part holding it by 2 corners and pulling it towards me when drying...blotting it sounds like a "swirl safe" method, im going to pick up a leaf blower this weekend also...Hopefully it was my poor drying techniques that caused those swirls....