Picking up new Roadster Sat

RomRox · 06-29-2010, 07:39 PM

I finished using Adam's Fine Machine Polish with the PC earlier this afternoon. Very happy with the results. Smooth as glass and near scratch free... swirls are 100% gone. I have some slightly deeper clearcoat scratches about 3 on the hood and 3 by the trunk emblem.... i'll order some focus pads to get those completely removed, but fairly happy considering the amount of time i've put into this thing so far.

Still needs wax which i'll be using Adam's Machine Super Wax? Or whatever it's called. Should go much faster than the other 2 procedures (swirl remover and fine machine polish).

Stealth: Sure I dont mind trying new stuff. I'll see how it compares to Adam's and Zaino since that's what i've used previously. I'll send you a PM

Jeff: Will definitely use detail spray next time I clay! I worked on the X6 to practice with the PC and Adam's polishes. It turned out REALLY well! I shoulda stuck with that method since claying with detail spray produced no swirls! For the X6, however, i used Zaino's claybar and detail spray.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need your help picking rims!	Vinny	Wheels & Tires	7	06-15-2010 02:13 PM
Picking up my Z thursday...	Jeffblue	Nissan 370Z Pricing / Ordering Discussions	18	05-05-2010 11:00 PM
Picking up new Z tomarrow	The BlueMax	New 370Z Owner	13	01-28-2010 12:52 PM
pretty close to picking up the new Z	stag3	Introduction	1	07-23-2009 02:25 AM
Picking up my 370Z in 30 min!	drisko	New 370Z Owner	19	03-04-2009 12:57 PM

06-29-2010, 07:39 PM	#1 (permalink)
RomRox Base Member Join Date: May 2010 Location: Edmonton, Alberta Posts: 110 Drives: 10 Nissan 370Z MB M6 Rep Power: 16	I finished using Adam's Fine Machine Polish with the PC earlier this afternoon. Very happy with the results. Smooth as glass and near scratch free... swirls are 100% gone. I have some slightly deeper clearcoat scratches about 3 on the hood and 3 by the trunk emblem.... i'll order some focus pads to get those completely removed, but fairly happy considering the amount of time i've put into this thing so far. Still needs wax which i'll be using Adam's Machine Super Wax? Or whatever it's called. Should go much faster than the other 2 procedures (swirl remover and fine machine polish). Stealth: Sure I dont mind trying new stuff. I'll see how it compares to Adam's and Zaino since that's what i've used previously. I'll send you a PM Jeff: Will definitely use detail spray next time I clay! I worked on the X6 to practice with the PC and Adam's polishes. It turned out REALLY well! I shoulda stuck with that method since claying with detail spray produced no swirls! For the X6, however, i used Zaino's claybar and detail spray.