GTA 2013 Meetups

alcheng · 09-12-2013, 05:11 PM

Quote:

Originally Posted by GaleForce

Fixed

make it 15 then.....

and it might come down a bit more if I drive the GaleForce's Z..

Luciano13 · 09-14-2013, 10:51 PM

Quote:

Originally Posted by GaleForce

I have a Stillen one that is basically new. I used it on my car for two weeks. It may have seen daylight 2-3 times. I'll let it go for $50 to a local guy in need. Can arrange pick up.

do u think that would work with the Nismo S-Tune Japan spec?

zefaulter · 09-12-2013, 05:46 PM

Haha! Ya 15min sounds about right when you guys are cruising

Ire · 09-12-2013, 08:05 PM

its funny cuz i have the same one that i never ended up installing.

LMBmikeZ · 09-12-2013, 09:15 PM

Quote:

Originally Posted by Ire

its funny cuz i have the same one that i never ended up installing.

why not? dealer put holes in the bumper like the newbs they are (painted part not the black)

Ire · 09-13-2013, 12:44 AM

thats actually why. there are two tiny holes where the plate goes. if i put the towhook plate in, the middle holes are visible.

LMBmikeZ · 09-13-2013, 09:06 AM

I hate that! my dealer put the holes in the black part below the painted part still pisses me off though cause I would have never had them install the front plate if I had remembered to ask when I purchased. I was just to excited about new Z to remember though

when I get a respray done I will be removing the front plate for good and fix the little holes.....

zefaulter · 09-13-2013, 10:45 AM

I'm gonna try to fix it myself. My plate holes are in the black part hopefully It will look alright

LMBmikeZ · 09-13-2013, 01:39 PM

Quote:

Originally Posted by zefaulter

I'm gonna try to fix it myself. My plate holes are in the black part hopefully It will look alright

if it is on the black you can fix it or you can always buy the CF cover for it

other idea is fill it and then use plasti-dip to cover it again

MrSir · 09-13-2013, 02:03 PM

hmm thats actually a good idea. i think i will actually do that with mine. The alternative is to go to nissan and buy some of those plastic pin things that hold the front bumper in place and just put them in the holes. So you end up having to circles on the black portion but no holes.

LMBmikeZ · 09-13-2013, 02:24 PM

Quote:

Originally Posted by MrSir

hmm thats actually a good idea. i think i will actually do that with mine. The alternative is to go to nissan and buy some of those plastic pin things that hold the front bumper in place and just put them in the holes. So you end up having to circles on the black portion but no holes.

IMO that would stick out like a sore thumb. I would rather plasti-dip then plug it.

my #1 choice would be CF cover

Boomer370 · 09-13-2013, 02:32 PM

Hey guys,

Could we start another thread about the license plate adapter in another thread?

The cruise conversation is getting a little lost.

Thanks!

alcheng · 09-13-2013, 06:39 PM

Quote:

Originally Posted by Boomer370

Hey guys,

Could we start another thread about the license plate adapter in another thread?

The cruise conversation is getting a little lost.

Thanks!

GaleForce · 09-13-2013, 06:59 PM

Quote:

Originally Posted by alcheng

LMBmikeZ · 09-13-2013, 07:29 PM

Quote:

Originally Posted by Boomer370

Hey guys,

Could we start another thread about the license plate adapter in another thread?

The cruise conversation is getting a little lost.

Thanks!

chill out people it was what 4 posts?

09-12-2013, 08:05 PM	#4 (permalink)
Ire Track Member Join Date: Sep 2011 Location: Toronto Posts: 785 Drives: 09 MB Rep Power: 18	its funny cuz i have the same one that i never ended up installing. __________________ Advan Racing, KW, GTHaus, Eibach, Berks, Injen, Motul, K&N, SPC, Sunline Racing, Z1, Evo-R, Aerojacket, Stoptech, Amuse Powerhouse, Defcon Racing, Fly1 Motorsports. pics

09-13-2013, 12:44 AM	#6 (permalink)
Ire Track Member Join Date: Sep 2011 Location: Toronto Posts: 785 Drives: 09 MB Rep Power: 18	thats actually why. there are two tiny holes where the plate goes. if i put the towhook plate in, the middle holes are visible. __________________ Advan Racing, KW, GTHaus, Eibach, Berks, Injen, Motul, K&N, SPC, Sunline Racing, Z1, Evo-R, Aerojacket, Stoptech, Amuse Powerhouse, Defcon Racing, Fly1 Motorsports. pics

09-13-2013, 09:06 AM	#7 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	I hate that! my dealer put the holes in the black part below the painted part still pisses me off though cause I would have never had them install the front plate if I had remembered to ask when I purchased. I was just to excited about new Z to remember though when I get a respray done I will be removing the front plate for good and fix the little holes..... __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

09-13-2013, 02:03 PM	#10 (permalink)
MrSir Enthusiast Member Join Date: Oct 2011 Location: Toronto Posts: 286 Drives: 09 370z Black A7 Rep Power: 15	hmm thats actually a good idea. i think i will actually do that with mine. The alternative is to go to nissan and buy some of those plastic pin things that hold the front bumper in place and just put them in the holes. So you end up having to circles on the black portion but no holes. __________________ Evo-R Front Lip \| RAZO Shifter Knob \| Avant Garde Wheels \| Hankook Tires \| Berk HFCs \| Agency Power CBE \| AEM CAIs \| Z1 Oil Cooler \| Morimoto xB LED Halos \| Tein Super Street \| StopTech Rotors, Pads, SS Lines

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-12-2013, 05:46 PM	#3 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 29	Haha! Ya 15min sounds about right when you guys are cruising

09-13-2013, 10:45 AM	#8 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 29	I'm gonna try to fix it myself. My plate holes are in the black part hopefully It will look alright

09-13-2013, 02:32 PM	#12 (permalink)
Boomer370 Enthusiast Member Join Date: Jul 2013 Location: Ontario, Canada Posts: 387 Drives: 2011 - 370z - Manual Rep Power: 13	Hey guys, Could we start another thread about the license plate adapter in another thread? The cruise conversation is getting a little lost. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ZCON 2013 - Aug 5-9, 2013	BobC-Z	United States	2	04-23-2013 09:34 AM
Happy New Year 2013 and Announcement from AK370Z 01.03.2013	AK370Z	Announcements	4	01-06-2013 12:22 AM
Forged Performance: 2013 Black Edition GT-R Tuning Results - 1st Tuned 2013!	ChadB@Forged	Other Vehicles	5	03-08-2012 02:42 PM
2013 z	Z eliminator	Nissan 370Z General Discussions	14	01-25-2012 09:10 PM