Swift Spring install question

Super Werty · 09-27-2013, 11:50 PM

How far did you drive it like that?!

fl350z · 09-28-2013, 08:09 PM

Ok so I got my springs fixed and rear rotors installed

The next day I see that to drive straight I have to tilt my steering wheel to the left
(So instead of the Z on the steering wheel being at a 12 o'clock position it's at a 1030 11 o'clock position to drive straight)

I take it to the dealer to get aligned and see if any work needed to be done if it could be done under warranty (as far as the steering wheel being crooked to drive straight)

He aligns the car but tells me he can only align the bottom part toes and the steering wheel sometimes will not be straight because they can't get it to be on the machine

He says if I want to align the top part camber bolts I have to buy some and he will do them

My question is doesn't my car have these already
I searched google and see them on there

Do the Oem ones not adjust or is he just trying to get one past me

The car is aligned according to him but it still pulls to the right

I attached the alignment sheets

fl350z · 09-28-2013, 08:11 PM

He says don't buy aftermarket so he can warranty the work

I'm a little skeptical and debating what to do

Any suggestions would be great

Zbrah · 09-28-2013, 08:29 PM

That guy is full of ****. Take your car to an outside shop to get it aligned, our car already have camber adjustments from the factory. Some people are able to get back to oem camber settings while some will need to get aftermarket camber arms.

fl350z · 09-28-2013, 08:35 PM

Did a little search
Is this correct
I will only need the rear camber kit on swift springs

Why alignment is needed after installing springs

I see here the eom ones are not adjustable but do I need these or just the rears
And what are safe specs for daily driving lowered on swift springs

Need your feedback on alignment...

fl350z · 09-28-2013, 08:58 PM

Before alignment:

After alignment:

Nut_N_Much · 09-28-2013, 09:48 PM

Give it a few months and the springs will settle as long as you drive it and not garage it.

critical · 09-28-2013, 09:49 PM

what did they do? lol

i'm scared for your Z. quit letting idiots molest it.

fl350z · 09-29-2013, 05:59 AM

I'm not sure!!! LoL

That's why I would like to fix the situation and am relying on the forum for so guidance

I went to a reliable shop first and then the dealer I figured they should know what to do

Again any input is GREATLY appreciated

I'm going to do some more research in the mean time

critical · 09-29-2013, 07:07 AM

rear camber is adjustable. it looks like they really didn't do **** to be honest. the front can be adjusted slightly too if they play around with it. you want left and right camber to be even. how much camber will be a preference but shooting for the minimum values here isn't a bad place to start. take it to a place that knows what they're doing and tell them what you want. also, wait a week before you go in to let the springs settle.

fl350z · 09-29-2013, 12:20 PM

Ok coo
Thanks for the info

I'll post up the new alignment sheets when I go get them done

Thanks for the help!!!

09-27-2013, 11:50 PM	#16 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 12	How far did you drive it like that?! __________________ The Build

09-28-2013, 09:48 PM	#22 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Give it a few months and the springs will settle as long as you drive it and not garage it. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

09-28-2013, 09:49 PM	#23 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 15	what did they do? lol i'm scared for your Z. quit letting idiots molest it. jlo370z and bacalhau1669 like this. __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

09-29-2013, 07:07 AM	#25 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 15	rear camber is adjustable. it looks like they really didn't do ** to be honest. the front can be adjusted slightly too if they play around with it. you want left and right camber to be even. how much camber will be a preference but shooting for the minimum values here isn't a bad place to start. take it to a place that knows what they're doing and tell them what you want. also, wait a week before you go in to let the springs settle. Zbrah likes this. __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms**\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
here are my alignment specs after swift spring install	area3z	Brakes & Suspension	5	03-28-2012 07:24 AM
[WTB] Swift spec-r spring	scottnismo	Parts for sale (Private Classifieds)	0	02-23-2012 10:31 PM
[WTB] Swift spring	Super Red Z	Parts for sale (Private Classifieds)	5	01-01-2012 01:50 PM
20's with swift or h&r spring?	w4kj4k	Brakes & Suspension	12	08-06-2011 05:29 PM

09-28-2013, 08:09 PM	#17 (permalink)
fl350z Base Member Join Date: Jan 2013 Location: Miami Posts: 197 Drives: #365 2011 Nismo Rep Power: 12	Ok so I got my springs fixed and rear rotors installed The next day I see that to drive straight I have to tilt my steering wheel to the left (So instead of the Z on the steering wheel being at a 12 o'clock position it's at a 1030 11 o'clock position to drive straight) I take it to the dealer to get aligned and see if any work needed to be done if it could be done under warranty (as far as the steering wheel being crooked to drive straight) He aligns the car but tells me he can only align the bottom part toes and the steering wheel sometimes will not be straight because they can't get it to be on the machine He says if I want to align the top part camber bolts I have to buy some and he will do them My question is doesn't my car have these already I searched google and see them on there Do the Oem ones not adjust or is he just trying to get one past me The car is aligned according to him but it still pulls to the right I attached the alignment sheets

09-28-2013, 08:11 PM	#18 (permalink)
fl350z Base Member Join Date: Jan 2013 Location: Miami Posts: 197 Drives: #365 2011 Nismo Rep Power: 12	He says don't buy aftermarket so he can warranty the work I'm a little skeptical and debating what to do Any suggestions would be great

09-28-2013, 08:29 PM	#19 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	That guy is full of ****. Take your car to an outside shop to get it aligned, our car already have camber adjustments from the factory. Some people are able to get back to oem camber settings while some will need to get aftermarket camber arms.

09-28-2013, 08:35 PM	#20 (permalink)
fl350z Base Member Join Date: Jan 2013 Location: Miami Posts: 197 Drives: #365 2011 Nismo Rep Power: 12	Did a little search Is this correct I will only need the rear camber kit on swift springs Why alignment is needed after installing springs I see here the eom ones are not adjustable but do I need these or just the rears And what are safe specs for daily driving lowered on swift springs Need your feedback on alignment...

09-28-2013, 08:58 PM	#21 (permalink)
fl350z Base Member Join Date: Jan 2013 Location: Miami Posts: 197 Drives: #365 2011 Nismo Rep Power: 12	Before alignment: After alignment:

09-29-2013, 05:59 AM	#24 (permalink)
fl350z Base Member Join Date: Jan 2013 Location: Miami Posts: 197 Drives: #365 2011 Nismo Rep Power: 12	I'm not sure!!! LoL That's why I would like to fix the situation and am relying on the forum for so guidance I went to a reliable shop first and then the dealer I figured they should know what to do Again any input is GREATLY appreciated I'm going to do some more research in the mean time

09-29-2013, 12:20 PM	#26 (permalink)
fl350z Base Member Join Date: Jan 2013 Location: Miami Posts: 197 Drives: #365 2011 Nismo Rep Power: 12	Ok coo Thanks for the info I'll post up the new alignment sheets when I go get them done Thanks for the help!!!