04-23-2013, 09:52 PM
|
#2 (permalink)
|
|
Base Member
Join Date: Sep 2012
Location: Lebanon
Posts: 159
Drives: Volvo T5-R
Rep Power: 14
|
Quote:
Originally Posted by ts-c63
no we made sure the wheel was dead centered... tightened everything up, took it off the rack drove off steering angle was still messed up, we did this about 3 times but the steering angle is still out of wack...
im thinking if i just send it to nissan if they will warrenty it? or if they will give me crap for changing out the springs and adding spacers.
|
Alignment machines can be inaccurate they are not perfect they need periodic maintenance and adjustment to keep them accurate. Also, you need to make sure the numbers are correct with correct weighting (driver/gastank), proper tire pressures and after the bolts have been tightened. Just the act of tightening the jam nuts can throw off an alignment a few tenths of a degree. If your machine says the wheels are strait and the wheel is strait when everything is tightened and the suspension is settled on the rack then you are A. Using the Alignment machine incorrectly. B. The Alignment machine isn't calibrated accurately.
|
|
|
Similar Threads
1Likes
Hybrid Mode
