spc rear camber arms same as 350z?

cheshirecat · 06-12-2013, 08:53 PM

Quote:

Originally Posted by BrandonSS

I'm not looking for the answer to save a few bucks. I'm just curious. And, like said before if one has the parts for their 350 and upgrade, what could they keep around?
As far as R&D'd... isnt the 370 lighter than the HR 350z's? Not looking at a pure engineering aspect, but the forces should be less than that of a 350z in cornering, meaning that the 350z arms should be beefier or stronger than needed on a 370. No?

I get what you're saying, but cornering pressures on suspension pieces aren't that cut and dry. However, you're on the right track.

From an engineering standpoint, a part is made to bear a certain amount of maximum load before failure. If one vehicle has the capacity to generate 50% of that load at max power, and the other has the capacity to generate 55%, you'd be safe to assume that the part can handle the loads from both vehicles without an issue.

just to add a nugget to the discussion... the 02-06 Maxima also uses the same arms and toe bolts.

It's almost like Nissan shares parts between different platforms. I wonder why they would do that.

One more- the 02-06 Altima also uses the same parts....

need I go on good sirs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] SPC Front and Rear Camber Arms Package With Rear Toe Bolts	scruffydog	Parts for sale (Private Classifieds)	2	07-12-2012 05:10 PM
[FOR SALE] SPC Rear Camber Arms	symple84	Parts for sale (Private Classifieds)	7	07-09-2012 09:06 PM
WTB: Rear camber arms	Ni55anPat	Wanted	1	02-19-2012 04:33 PM
[WTB] Rear Camber Arms	Synack	Parts for sale (Private Classifieds)	1	02-08-2012 11:02 PM
WTB:295/30/19 and rear camber arms	Ni55anPat	Wanted	3	12-26-2011 12:39 PM